Winch Mounting Plate For Badlands Winch

Question

Question:

I bought a 18000 pound badlands winch. I was interested in buying a winch mount reciever from you but you seem to have nothing that can take that capacity winch. Please get back to me as I am having a hard time finding anything over 15000 pound capacity. Thank you

asked by: Nicholas A

0

Expert Reply:

I do have a solution for you, however, we not offer winch mounting plates specifically for Badlands Winches. Most winches use the industry-standard bolt pattern, but you will want to verify fitment with Badlands or drill your own mounting holes if necessary. The Universal Mounting Plate # BDW20295 has the highest weight rating out of all of our winch plates, rated at 15,000lbs max. For a receiver-mounted winch plate there is the Curt Trailer Hitch Electric Winch Mount # C31010; however, this only has a weight capacity of 9,000lbs. You will want to check with Badlands Winches to see if they offer a winch plate for your 18,000lb winch. I have attached demonstration videos for these products which will also show you a few essential measurements.

expert reply by: Andrew N

0

Answer 1

Adding a 7-way to your 2020 Kia Telluride with the functions you need is fairly simple. Since you already have a 4-way installed the only thing you need is the #ETBC7. This comes with the adapter, wiring, breakers, and everything else required for…

view full answer...

Answer 2

A hitch extender or adapter, like the dual-receiver MT70070, cannot be used with weight distribution (WD) systems. As you note, use of ANY adapter has the unavoidable side-effect of cutting your hitch's capacity by 50-percent. An adapter would…

view full answer...

Answer 3

I went out to the warehouse and pulled the Vented Battery Box, #DW03009, and produced a short video showing the dimensions of the box for you, see link. The inside dimensions of the box with the lid removed are 10-3/4 inches long, by 7 inches wide at…

view full answer...

Answer 4

For your Superwinch Terra 45 Series ATV Winch part #SW1145220 you will want to use a hawse fairlead like part #BDW20089 for winches with a synthetic rope. You can still technically use a synthetic rope with a roller fairlead like the Roller Fairlead…

view full answer...

Answer 5

We certainly have a large selection of electric trailer winches and everything else you would need to launch and retrieve your boat but I am a bit confused on how you are trying to accomplish this. Would it be possible for you to sketch a quick…

view full answer...

Answer 6

The Superwinch Winch 2 Go 4000 SR #SW1140232 includes a mounting plate that bolts to the bottom of the winch's main housing. This yellow steel plate itself has four exposed mounting holes to allow it to be secured to a stationary surface. The…

view full answer...

Answer 7

The instruction manual for the Trailer Valet XL Trailer Dolly with Chain Drive item #TVXL2 states not to use the dolly on any flat or paved incline or decline that is steeper than 10 degrees.

view full answer...

Answer 8

Would a dolly possibly be easier to maneuver the trailer? Sounds like what you are really wanting to do is hand guide a trailer into a parking spot and were wanting a winch to help control it and guide it. For that type of application the Trailer…

view full answer...

Answer 9

Trailer Valet XL Trailer Dolly #TVXL25 will be able to move your trailer at the near 90 degree angle and up the incline of the driveway. The dolly has 2 gears and you will likely find that the low speed, 27 to 1 ratio will make it easier on you…

view full answer...

Answer 10

I haven't ever personally used a front hitch to maneuver a trailer, but I do know that everyone I know that has one, swears by it as the greatest solution for this problem. It will definitely make getting your trailer into a tight space easier,…

view full answer...

Answer 11

The hitch mounted winch mounting plate we offer that will work with the Bulldog Winch Standard Series Winch, part #BDW10043 is part #BDW20011. This mounting plate will work with 2 inch trailer hitch receiver openings. This mounting plate has handles…

view full answer...

Answer 12

To install a winch on your GMC Sierra 1500 I recommend installing a front mount trailer hitch receiver and use a removeable winch mount. This will allow you to have the winch when needed, but also allow you to easily remove the winch when you do not…

view full answer...