Availability Of 15" Trailer Wheels With 5 On 4-1/2 Bolt Pattern

Question

Question:

I like to buy 4 set The rims size 15” hole 41/2

asked by: Elias E

0

Expert Reply:

It sounds like you are looking for 15" wheels with the 5 on 4-1/2 bolt pattern.

We have quite a few wheels that fit this description, but out of them I recommend taking a look at the Dexstar Steel Mini Mod Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 in Black # AM20440, Silver # AM20537, or White # AM20551.

If you can tell me which tire size you are planning on using I would be happy to make sure the wheels mentioned are the correct width for your application.

I included a link to all of our 15" wheels with the 5 on 4-1/2 bolt pattern and videos for each of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Your tire size of 205/75-15 can fit rim widths between 5 and 6-1/2 inches. That means that the Dexstar part #AM20443 and the #AM20551 would both work just fine.

view full answer...

Answer 2

We have many wheels that will work with the ST225/75R15 tire size. I have attached a link to all of your options as these tires will fit a standard 15x6 inch rim in the 6 on 5-1/2 bolt pattern. You will want to make sure the valve stem you use allows…

view full answer...

Answer 3

Dexstar Steel Mini Mod Trailer Wheel #AM20794 has the same 3,960 pound capacity at 110 psi as Karrier ST235/85R16 Radial Trailer Tire #AM10501. So if you are looking for an 8 on 6-1/2 bolt pattern these two would be a great match. For a valve stem…

view full answer...

Answer 4

Wheel #AM20789 is the Dexstar wheel you are looking for. The 17-310 is the Dexstar part number. The only difference is that we use a different part number #AM20789. It is the exact same wheel made by Dexstar: 16x6 with 8 on 6-1/2 bolt pattern rated…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

I'm happy to confirm that yes, the B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 with the B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches #BWRVR3200, and the Draw-Tite 5th Wheel/Gooseneck Wiring…

view full answer...

Answer 10

As you may have already found, 5200 lb, 6000 lb and 7000 lb axles can all use the same components including inner/outer bearings, hubs and brakes. Here are some other things they share in common: Dexter 5200 lb Regular Duty Axle - 0.180 inch tube…

view full answer...