1-1/4" Hitch Receiver Options For 2020 Ford Escape Hybrid

Question

Question:

Do you have a 1 1/4 hitch that will fit a 2020 ford escape hybrid? Only needed.for bike rack not tow.please help thanks

asked by: Frederick S

0

Expert Reply:

I do have a solution for you, however, there is not currently a 1-1/4" hitch receiver that is confirmed to fit your 2020 Ford Escape Hybrid. I recommend going with a 2" receiver and using a hitch adapter to convert it from 2" to 1-1/4". Go with the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C23FR, which is confirmed to fit your vehicle. This offers a simple bolt-on installation process and requires no welding or drilling. For the adapter, use Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02. This will allow you to use your 1-1/4" bike rack with this 2" receiver. I have attached installation videos for both of these products.

expert reply by: Andrew N

0

Answer 1

When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty…

view full answer...

Answer 2

For your 2020 Ford Escape Hybrid models, you will want to use the etrailer #e89YR, which has been confirmed as a fit on your Escape Hybrid. When it comes to the operations of the hands free lift gate, we have found that in order to use this feature…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Generally speaking wheel mount only bike racks are preferred. Especially for people with carbon fiber bike frames since frame mounts aren't recommended at all with them otherwise damage could occur. For other frame designs people still prefer…

view full answer...

1-1/4" Hitch Receiver Options For 2020 Ford Escape Hybrid

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching