Recommended Hitch for 2020 Ford Escape Hybrid

Question

Question:

I want to make sure I can use this hitch with the hybrid version of the escape. Also, how does the installation of this hitch affect the hands free liftgate operation?

asked by: Kevin T

0

Expert Reply:

For your 2020 Ford Escape Hybrid models, you will want to use the etrailer # e89YR, which has been confirmed as a fit on your Escape Hybrid. When it comes to the operations of the hands free lift gate, we have found that in order to use this feature you will need to kick on either side of the hitch receiver, but it will still operate and allow you utilize the hands free opening of your rear cargo gate.

If you're going to be towing with your Escape Hybrid, you'll want to use the Tekonsha # TE54FR to install a 4 way connector on your vehicle to power the trailer lights. This connector tees into the plugs behind your vehicle's tail lights for an easy installation. You'll also need a ball mount and hitch ball; I recommend using the etrailer Ball Mount Kit # 989900 since it comes with 2 ball mounts, 2 hitch balls, pins, clips and a handy carrying case that will allow you to tow a variety of different trailer setups.

I've linked some informational videos on a few of these items that you may want to have a look at, as well.

expert reply by: Erik B

0

Brian M.

5/14/2020

2020 escape hybrid showing tongue weight of 150lbs. I have 2 bikes and the hitch totaling 270 lbs. Can a class 3 hitch be the resolution?

Reply

Chris R.

5/18/2020

If the owner's manual lists a tongue weight capacity of 150 pounds for your 2020 Ford Escape Hybrid, this capacity cannot be increased by adding a higher-rated hitch. You'll always be limited by this listed capacity. With that being said, please keep in mind that you don't need to add the weight of the actual hitch to your tongue weight. As long as the total weight of your bikes and bike rack don't exceed 150 pounds, you're good to go.

Reply

Answer 1

The etrailer hitch part #e89YR that you referenced does fit the hybrid models and will still allow the hands free liftgate to function but you'd have to kick to either side of the hitch opening to activate it.

view full answer...

Answer 2

We do have a trailer hitch confirmed to fit all models of the 2020 Ford Escape, including the Hybrid - the etrailer Class III Hitch Receiver #e89YR. This has a 2 inch receiver and a tongue weight capacity of 525 lbs, perfectly suitable for a bike…

view full answer...

Answer 3

To flat tow the 2020 Ford Escape Hybrid behind the motorhome you need a baseplate, safety cables, wiring, tow bar, supplemental braking system and possibly a high low adapter. I have made a list of recommendations below. Roadmaster Direct-Connect…

view full answer...

Answer 4

To install the etrailer brand #e89YR Class III hitch on your 2021 Ford Escape, you will NOT need to trim the bumper fascia, as you can see in the provided photo and video showing the identical Curt hitch being installed on a 2021 Ford Escape like…

view full answer...

Answer 5

The main difference between the Curt #C23FR and etrailer #e89YR for your 2022 Ford Escape is the finishes. The Curt #C23FR has a glossy black finish and the etrailer #e89YR has a matte black finish. Their capacities and installations are the same.…

view full answer...

Answer 6

The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #DT92RR is confirmed to fit all 2020 Ford Escape models with the exception of the Hybrid. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class…

view full answer...

Answer 7

The Draw-Tite Max-Frame Trailer Hitch Receiver #DR47FR is a fit for your 2020 Ford Escape Titanium Hybrid as indicated by the Q&As that you've seen. From what I could find it looks like Draw-Tite has gone back and forth as to whether…

view full answer...

Answer 8

The etrailer Trailer Hitch Receiver #e89YR is definitely a confirmed to fit your 2020 Ford Escape Hybrid. This hitch also uses a hidden cross bar to make it look cleaner on the back of your Escape. I recommend the Tekonsha T-One Vehicle Wiring…

view full answer...

Answer 9

The Curt #C23FR has been confirmed as a fit on the Hybrid models of the 2020 Escape. If you're going to be towing with your Escape you'll also need a wiring harness, ball mount and hitch ball. For a wiring harness, the Tekonsha…

view full answer...

Answer 10

Yes, the Draw Tite hitch part #DR47FR is a confirmed fit for the hybrid models of the 2020 Ford Escape like what you have. This would fit and work great! For trailer wiring you'd then want the Tekonsha kit part #TE54FR for an easy to install…

view full answer...

Answer 11

The Curt hitch part #C23FR does fit your 2021 Ford Escape Hybrid Titanium and will allow your hands free liftgate to still function but you'll have to kick to either side of the hitch opening.

view full answer...

Answer 12

I do have a solution for you, however, there is not currently a 1-1/4" hitch receiver that is confirmed to fit your 2020 Ford Escape Hybrid. I recommend going with a 2" receiver and using a hitch adapter to convert it from…

view full answer...

Recommended Hitch for 2020 Ford Escape Hybrid

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching