Recommended Trailer Hitch and E-Bike Rack for 2020 Tesla Model S

Question

Question:

Can you recommend a hitch and bike rack for a Tesla Model S to carry two e-bikes weighing 50 lbs each? thanks

asked by: Fred S

0

Expert Reply:

We can absolutely get your 2020 Tesla Model S set up with a trailer hitch and bike rack for a pair of 50 lb electric bikes, and let's go ahead and start with the bike rack. For that, the best option by far is from EcoHitch:

- EcoHitch Stealth Trailer Hitch Receiver # 306-X7201

The reason this EcoHitch is the best option for your Tesla is because it is the only hitch for this vehicle which has a 2 inch receiver, which is important because a 2 inch hitch allows for a much better option for an e-bike rack that wouldn't otherwise be available.

The EcoHitch Stealth # 306-X7201 is also really cool because it has a completely removable receiver for when you aren't using it, so it looks as if you have no hitch at all, completely maintaining your Tesla's clean look. If you do decide to remove the receiver, the only thing I recommend is adding a cover for the access hole, the Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch Receiver # 306-XA2001.

Then for a bike rack for your electric bikes I highly recommend the Yakima HoldUp Bike Rack # Y02443.

The HoldUp has a lot going for it, starting with it being an excellent value relative to other electric bike racks. It has a 60 lb per-bike capacity which is enough for your 50 lb e-bikes and is a wheel-mounted carrier, which is great because it means there is no contact with your bike's frame whatsoever. The HoldUp also has adjustable trays so you can maneuver them from side to side to ensure your bikes don't contact one another. It also folds up and tilts down, and comes with a hitch lock and integrated cable lock, helping protect the rack and your e-bikes.

I have added a link below to a video review for you to check out as well of the Yakima HoldUp # Y02443.

expert reply by: Kyle S

0

Answer 1

For your 2014 Tesla Model S with EcoHitch #306-X7201 the lightest 4-Bike rack would be the Saris Freedom SuperClamp #SA4026F that you mentioned. It would be the lightest at 63 pounds. I have linked a video review of this bike rack as well.

view full answer...

Answer 2

Yes, you can buy the Yakima HoldUp Plus 2 Adapter, part #Y02435, that can be added to the Yakima Holdup 2 Bike Hitch Rack, part #Y02446, to increase the bike rack to a 4 bike carrier. The Yakima Holdup 4 Bike Hitch Rack, part #Y02443-2, is just the 2…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...