Hidden Trailer Hitch for 2015 Cadillac SRX

Question

Question:

Is there a stealth or hidden hitch to fit my 2015 Cadillac SRX?

asked by: Bob B

0

Expert Reply:

There is a trailer hitch receiver that has a concealed crosstube for your 2015 Cadillac SRX, which is from Draw-Tite:

- Draw-Tite Max-Frame Trailer Hitch Receiver # 75682

As you can see by the accompanying photo, the crosstube of the hitch is almost entirely hidden, so only the receiver is showing. The center fascia panel will be removed so just a portion of the hitch is showing, with the rest of it hidden behind the remaining fascia.

I have added a link below to a video review for you to check out as well of the Draw-Tite Max-Frame Trailer Hitch Receiver # 75682.

expert reply by: Kyle S

0

Concealed Trailer Hitch Receiver on 2015 Cadillac SRX
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Hidden Trailer Hitch for 2015 Cadillac SRX

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching