Trailer Wiring Recommendation for 2019 Jeep Cherokee Latitude

Question

Question:

I have a 2019 Jeep cherokee latitude and would like to know the correct trailer wiring kit for it. Thank You

asked by: Robertr B

0

Expert Reply:

For your 2019 Jeep Cherokee Latitude the best trailer wiring option is the Curt part # C56406 as it installs the easiest and has the most reliable converter box as well.

I attached an install video for more info on this as well.

expert reply by: Jameson C

0

Answer 1

I do have everything you need to setup a 2019 Jeep Cherokee for towing but not all models come with the factory tow package. If you don't have this and you need to tow a trailer you'll need to start with a trailer hitch and for this…

view full answer...

Answer 2

Installing a trailer hitch like the recommended Curt #C13395 that you referenced will not void the warranty on your 2019 Jeep Cherokee Latitude unless the problem was the direct result of the installation. This is covered under the Federal…

view full answer...

Answer 3

There are three differences in the two receivers. The etrailer Hitch item #e73ZR mounts slightly higher and will offer more ground clearance but the installation is more difficult. The Curt Trailer Hitch Receiver item #C13395 has a higher towing…

view full answer...

Answer 4

The Curt #C13395 is a great choice for your 2021 Jeep Cherokee since Curt hitches have a bit thicker powder coating; this helps prolong the life of the hitch since it will resist nicks and scratches a bit better than some other options. This hitch…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Trailer Wiring Recommendation for 2019 Jeep Cherokee Latitude

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching