Recommended Electric Replacement for Manual Trailer Roof Vent

Question

Question:

I have a 2021 Dutchman Coleman lantern 17B travel trailer and it has two manual vents in the ceiling that I can open. One in shower and one in kitchen. Do you have the 12v exhaust fans that I can replace my vents with?

asked by: Pam S

0

Expert Reply:

The trailer roof vents are all the same size so you can replace them rather easily. I recommend the Ventline Ventadome Trailer Roof Vent part # V2094SP-28 for white or part # V2094SP-34 for smoke. These options both have an electric exhaust fan with integrated controls.

expert reply by: Conner L

0

Answer 1

We have two options of replacement vent covers for the V2094 model, the white dome assembly, #BVD0449-A01, and the #BVD0449-A03 for smoke. These work for Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008. Pre 2008,…

view full answer...

Answer 2

Based on the design of the pictures you sent in it looks like a Ventline. I spoke with a Ventline tech and due to the older model design of your unit and with it being exposed to the elements you would need to replace the whole unit. If you just…

view full answer...

Answer 3

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 4

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 5

Hey Scott, so since you have a Dometic AC unit currently the replacement you'd want is the Advent Air part #ACDOM150 which was designed to replace Dometic units which means a really simple install that allows you to use current wiring and…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 8

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 9

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Recommended Electric Replacement for Manual Trailer Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching