Gooseneck Coupler that Fits 3 inch Ball

Question

Question:

Good morning, I really need some help on my decision on what’s best for my truck, I have a 2018 Dodge 3500 with a CM flat bed truck with utility boxes from the bed rails to the top of the boxes it’s 18inches It has a standard BandW roughly 3in ball that under the flap of the cover I need to know what my best option is gonna be. I see guys doing it all the time with welders etc. I need something to give me enough hight to clear my boxes, an that will go down on the ball. Thank you so much for your input it would be greatly appreciated my ball is also 3inches

asked by: Christian S

0

Expert Reply:

Are you looking for a gooseneck coupler to weld onto your trailer that would be tall enough? I am not totally sure I understand your question but we do have the Bulldog BX1 part # BD1289200300 which fits 3 inch balls which is our only option for 3 inch balls. It has an extended height of 24-9/16 inch and a retracted height of 22 inch.

expert reply by: Jameson C

0

Answer 1

For the 3 inch gooseneck ball size you have we only have the Bulldog BX1 Gooseneck Coupler #BD1289200300 which has the more limited height range of 22 to 24-9/16 inch. Normally a large amount of adjustability isn't needed as long as you mount the…

view full answer...

Answer 2

The Bulldog BX1 Gooseneck Coupler - Adjustable Height - Square - 3" Ball - 40,000 lbs #BD1289200300 you were looking at weighs in at 60lbs. I included a video of the #BD1289200300 for you to take a look at.

view full answer...

Answer 3

Yes, you could attach the Durabilt Ratchet Chain Binder w/ T-Handle and Chain for 5/16" to 3/8" Chains #DU42MR could be used to attach to cargo and through a d-ring to itself. Since the clevis doesn't come with a clip to prevent it from…

view full answer...

Answer 4

It appears TMW is a overseas company which I could not find much information. The 46210 is a common hub number for a 3,500lb idler hub with 5 on 4-1/2" bolt pattern. This would use either the Idler Hub #AKIHUB-545-35-G-K for standard spindles or…

view full answer...

Answer 5

Hey Robert, we only carry the Bulldog BX1 with the part #BD1289200300 which includes the outer tube bracket. Bulldog does not offer just the inner tube.

view full answer...

Answer 6

The support capacity is how much a jack can hold whereas the lift capacity is how much a jack can lift. The Bulldog Square Jack w/ Footplate part #BD190754 has a 8,000 lb support and 5,000 lb lift capacity. If you will be using the jacks to lift and…

view full answer...

Answer 7

The height (as if the hub was resting on a table top) is 4-1/16 inches for the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles #DX22XR.

view full answer...

Answer 8

To flat tow a Smart Fortwo you will need a few different parts, and that starts with a base plate kit. I recommend the Roadmaster EZ Base Plate Kit #52285-1 because it has brackets that are hidden away for a clean look and drawbars you can easily…

view full answer...

Answer 9

The Deutsche Hydrapro Alpha G-1600 #DH94FR does not require an additional adapter like the Hydrastar #HBA-CAM. This brake actuator has a built-in compatibility adapter so it will work with the factory brake controller in your 2016 Silverado 2500 and…

view full answer...

Answer 10

I really wish we had replacement parts still for the Atwood couplers but since they've been out of business for so long we don't have any way to get the parts you are wanting.

view full answer...

Answer 11

We definitely have some trailer jacks you can use as a replacement for your Dutton-Lainson but it doesn't look like anything we have will work as a direct replacement. If you'd like to stick with the Dutton-Lainson brand then I recommend…

view full answer...

Gooseneck Coupler that Fits 3 inch Ball

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching