Fifth Wheel/Gooseneck Wiring Harness for 2009 Dodge Ram 1500

Question

Question:

Will it fit a 2009 ram 1500? The truck is a sport model with factory wire harness. Thanks.

asked by: Kevin

0

Expert Reply:

The Fifth Wheel/Gooseneck Wiring Harness you referenced, part # PK11893-11932 is indeed the recommended wiring harness for your 2009 Dodge Ram 1500.

The harness plugs inline at the connection behind your existing trailer connector, as you can see by watching the video I have linked you to.

expert reply by: Mike L

0

Answer 1

I attached a picture that shows the pin out diagram for the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-11932 that you referenced.

view full answer...

Answer 2

Yes, the Pollack Fifth Wheel and Gooseneck Wiring Harness, #PK11932, will work with your 2013 Ram 3500HD as long as you already have an in-bed 7-way trailer socket that accepts they standard US style round connector (see photo). If you do not have…

view full answer...

Answer 3

I spoke with my contact at Lippert regarding the existing Lippert 1716 Pin Box #LC1324791 on your trailer. He stated that you can actually replace the pin box with the Lippert 1116 Pin Box #LC1270271, which is shorter than what you have but uses…

view full answer...

Answer 4

Trailair Flex Air 5th Wheel Pin Box #LC328492 for Lippert 1621 pin boxes will work the same hookup angles that your 5th wheel hitch is rated for which is to say as straight of an angle as you can get. The pin box needs to be able to ramp up the 5th…

view full answer...

Answer 5

All the MORryde Cushioned 5th Wheel Pin Boxes #MR57VR, #MR37VR and #MR97VR will share the same dimensions and are nearly identical to the Lippert 1716 5th Wheel Pin Box #LC1324791. I have attached a technical drawing for the MORryde pin boxes similar…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

Gen-Y's calculation for pin weight is a safe guess, but isn't the most accurate so the only way you'll get the correct capacity Gen-Y 5th Wheel Pin Box is to fully load the trailer and go to a commercial scale to measure the pin weight.…

view full answer...

Answer 10

There is a way to to a fifth wheel trailer with your 2020 Ram 2500 that has the Ramboxes but you have to install a Sidewinder pin box on the trailer so that the pivot point is raised up high enough that there isn't interference between the pin…

view full answer...

Answer 11

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…

view full answer...

Answer 12

Personally I feel like the Demco Autoslide 5th Wheel Trailer Hitch #DM8550040 is the best option for your 2021 Nissan Titan towing a 2011 Forest River Rockwood 8265WS. The Autoslide will move back up to 22-1/2" when you turn to give you the…

view full answer...

Fifth Wheel/Gooseneck Wiring Harness for 2009 Dodge Ram 1500

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching