Can I Use the Convert-a-Ball Multi Cushioned Gooseneck Trailer Coupler on a Big Tex Trailer

Question

Question:

Will this work on a 2020 25GN Big Tex Trailer that has a hand crank on top and pinch bolts to adjust ride height?

asked by: Tim L

0

Expert Reply:

As long as your Big Tex Trailer has an existing 4" inner diameter outer tube, then you can use the Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler - Round - 30,000 lbs # CG to replace the inner tube of the gooseneck trailer coupler and help smooth out your towing experience. This coupler can be adjusted using the set screws on the outer tube that you've mentioned.

expert reply by: Erik B

0

Answer 1

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler, #CG, fits inside of an outer tube that has a 4 inch inner diameter. If the outer tube on your existing trailer has an outer tube with a 4 inch inner diameter and it uses safety pins to…

view full answer...

Answer 2

I spoke with my contact at Convert-A-Ball about the pin weight capacity of their CG Cushioned Gooseneck Coupler. They list a 30,000 lb weight capacity for the coupler and a 4,000 lbs tongue, or pin weight. Since your 2400 lb pin weight isn't…

view full answer...

Answer 3

Yes, the adapter plates are included with the Curt RockerBall Shock Absorbing Gooseneck Hitch Ball #C67DR. They serve as an adapter if you're using the ball with a B&W gooseneck hitch. This ball is also compatible with Curt Double…

view full answer...

Answer 4

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler, part #CG, will slide up in the 4 inch inner diameter tube that is on the trailer. It can be adjusted for height by using the set screws on the gooseneck trailer tube.

view full answer...

Answer 5

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler #CG will work in your gooseneck hitch so long as your outer tube is round with a 4-inch inside diameter and it has bolts to secure this inner tube component. Most gooseneck trailer outer…

view full answer...

Answer 6

If we compare the Curt RockerBall #C67DR to a standard B&W gooseneck hitch ball like part #BWGNXA2000 the RockerBall is 3-3/4" taller. The B&W measures 4" from the center of the hitch pin hole to the base of the hitch ball while the…

view full answer...

Answer 7

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler #CG is designed to work with the single set screw. The screw will press on the inner tube. You will not have a problem as long as you are not exceeding the towing capacity of 30,000 lbs and…

view full answer...

Answer 8

The Convert-A-Ball Trailer Coupler #CG is rated for 30,000 lbs of total trailer weight and 4,000 lbs of tongue weight. If your horse trailer's weight falls is under those capacities this coupler would work well for you. Tongue weight of a…

view full answer...

Answer 9

The Curt RockerBall Shock Absorbing Gooseneck Hitch Ball part #C67DR is compatible with the following gooseneck hitches: Curt Double Lock (Round Receiver) Curt Double Lock EZr (Round Receiver) B&W Turnoverball (Square Receiver) If you're…

view full answer...

Answer 10

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler #CG is designed to normally be used with a set screw that pressed onto the inner tube basically. If you wanted to drill a hole that is properly sized for your current set screw that passes…

view full answer...

Answer 11

I called the supplier (Convert-A-Ball) and they said the Convert-A-Ball Trailer Coupler, #CG, can be welded, but recommended it be welded by a experienced welding shop. They also mentioned it would have to be welded at least 12 inches up from the…

view full answer...

Answer 12

The Convert-A-Ball Trailer Coupler, part #CG does not have the holes as you mentioned for height adjustment. This coupler uses the 2 set screws on your coupler for securing the tube inside your trailer 4 inch\ outer tube. You will want to have your…

view full answer...