Does The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler # CG Allow For Height Adjustment

Question

Question:

will this coupler allow height adjustment up and down like other couplers?

asked by: Lyndell

0

Expert Reply:

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler, part # CG, will slide up in the 4 inch inner diameter tube that is on the trailer. It can be adjusted for height by using the set screws on the gooseneck trailer tube.

expert reply by: Jeff D

0

Answer 1

The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57531 will fit your 2022 Ram 3500 Mega Cab with single rear wheels. This is the extra heavy duty 7,500 lb kit so it is most commonly used on dually trucks, but it will fit single rear wheel models…

view full answer...

Answer 2

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 3

If you only have a 1 inch lift you wouldn't need a spacer when installing the Air Lift Load Lifter 5000 part #AL88231 on your 2021 Ram 3500.

view full answer...

Answer 4

Thank you for the pictures and further detail of the trailer being unloaded. The main issue causing the bounce is the lack of pin weight when your trailer is unloaded. This can be solved by adding in shocks like the Roadmaster Comfort Ride Leaf…

view full answer...

Answer 5

Actually I just checked with Convert a Ball and the pin weight (or tongue weight) for the Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler #CG that you referenced has been upgraded to 4,000 lbs and is no longer 2,000 lbs.

view full answer...

Answer 6

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler #CG is designed to work with the single set screw. The screw will press on the inner tube. You will not have a problem as long as you are not exceeding the towing capacity of 30,000 lbs and…

view full answer...

Answer 7

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler, #CG, fits inside of an outer tube that has a 4 inch inner diameter. If the outer tube on your existing trailer has an outer tube with a 4 inch inner diameter and it uses safety pins to…

view full answer...

Answer 8

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler part #CG is designed to be used with set screws, we cannot recommend you drill to use a pin. That said, it will still work on an inner tube with pre-drilled holes for the pins so there…

view full answer...

Answer 9

The max vertical weight (or tongue weight) that the part #CG can handle is 4,000 lbs. It has a total trailer weight rating of 30,000 lbs. This also uses a 2-5/16 inch ball so based on that and the 30k capacity you need this would work for you.

view full answer...

Answer 10

The Convert-A-Ball Trailer Coupler #CG is rated for 30,000 lbs of total trailer weight and 4,000 lbs of tongue weight. If your horse trailer's weight falls is under those capacities this coupler would work well for you. Tongue weight of a…

view full answer...

Answer 11

I spoke with my contact at Convert-A-Ball about the pin weight capacity of their CG Cushioned Gooseneck Coupler. They list a 30,000 lb weight capacity for the coupler and a 4,000 lbs tongue, or pin weight. Since your 2400 lb pin weight isn't even…

view full answer...

Answer 12

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler #CG that you referenced is an inner tube portion of a gooseneck hitch. The outer tube would have the set screws that secure it in place. I attached a picture that shows it installed for you…

view full answer...

Does The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler # CG Allow For Height Adjustment

Product Page this Question was Asked From

Continue Researching