Does Go Power Solar Flex Charging System with Solar Controller Charge Lead Acid Batteries

Question

Question:

Will this charge lead acid batteries?

asked by: Harold P

0

Expert Reply:

The Go Power Solar Flex Charging System with Digital Solar Controller - 30 Watt Solar Panel # GP64ZRyou were looking at is confirmed to work with sealed/gel, AGM, and flooded/wet cell lead acid batteries. It will also charge lithium batteries.

I included a video of the Go Power # GP64ZR for you to take a look at.

expert reply by: Samuel C

0

Answer 1

I spoke with my contact at Go Power and he said that under good sun conditions and with limited to no power draw, the 10 Watt Solar Panel Charging System #34273836 that you referenced should be enough to provide a sufficient trickle charge to your 2…

view full answer...

Answer 2

Yes. Because lithium batteries have a full charge voltage of 14.4 to 14.6 volts, your standard battery charger/converter system will not be able to fully charge a lithium battery so you will need to upgrade your system. The Progressive Dynamics…

view full answer...

Answer 3

I recommend using the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness w/ 7-Pole Connector - 6' Long #HM41158. It mounts in the truck bed sidewall, tailgate post or the wheel well. It will plug into your factory wiring.

view full answer...

Answer 4

The Hopkins #41157 is a great option. Simply tee this into the US Car Connector directly behind your current 7-Way and bundle the wiring up and out of the way. This will give you a 2nd 7-Way on your Silverado, but keep in mind that if your camper is…

view full answer...

Answer 5

The Hopkins Endurance 5th Wheel/Gooseneck Wiring Harness will connect on any vehicle that has a standard round U.S. Car type connector at the back of its 7-way. The linked photo shows the connectors on this part which plug in between the OEM harness…

view full answer...

Answer 6

It is possible for you to install both the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness, #HM41158, and the Hopkins Smart Hitch Backup Camera and Hitch Aligner System, #HM50002. The Hopkins Smart Hitch has alternative installation…

view full answer...

Answer 7

With a factory trailer harness all of the wires you are looking for are at the back of that plug. To keep from splicing into the wiring harness there or tying up the plug itself you can use a T-Connector to duplicate the signals. The best way to…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Does Go Power Solar Flex Charging System with Solar Controller Charge Lead Acid Batteries

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching