Recommended Tire Valve Extenders for Dually Pickups

Question

Question:

2018 gmc sierra 3500hd dually. Looking for tire valve extenders for my rear inner tires and possibly a short extension for my rear outer tire.

asked by: John S

0

Expert Reply:

I have some great options for tire valve extenders, the good news is that they are universal in designed so all you really need to do to find the correct ones is determine the length you need along with the angle. The Wheel Masters Tire Pressure Valve Extenders - 45-Degree Bend part # WM8029 and Wheel Masters Tire Pressure Valve Extenders - Straight part # WM80292 are both great options.

I have attached our full list below.

expert reply by: Conner L

0

Answer 1

To use the TST TPMS 4 Flow Through Tire Sensors item #TST-507-FT-4 or 6 Flow Through Sensors item # TST-507-FT-6-C you will need to swap out your rubber valve stems with valve stems that are steel, chrome or nickel. You can use the Americana Metal,…

view full answer...

Answer 2

Regardless of whether you go with the cap style or flow through, they use the same monitor so you should be good to continue use with your current monitor. I would recommend sticking with the flow through sensors like the Flow Through Tire Sensors…

view full answer...

Answer 3

The sensors of the #TST-507-FT-4 are less than .1 of a lb which means they would not throw your wheel out of balance and would not require rebalancing. We also have not had any customers report back that they had to do this either.

view full answer...

Answer 4

The two kits you mentioned are basically the exact same with exception being the color of the display. The #TST-507-FT-4-C has the color display that puts the alert messages in red if there's high or low pressure as well as temperature whereas…

view full answer...

Answer 5

In regards to choosing the correct valve stem extenders, this will really come down to your specific application so it would be hard for me to help you pick out a set. The Wheel Masters Tire Pressure Valve Extenders part #WM8029 usually work well on…

view full answer...

Answer 6

For your 2014 Ford F-250/350 Super Duty you will want to use Wheel Masters 4-Hose Inflation Kit part #WM8001. The bend on the Wheel Masters 4-Hose Inflation Kit part #WM8001-135 causes the hoses to be in contact with your rim as soon as it comes off…

view full answer...

Answer 7

While we do not currently carry the Pacific Dualies 18090 valve stem extenders that you mentioned, I did some research and found that the manufacturer does state that they don't recommend them for use with rubber valve stems. From what I could…

view full answer...

Answer 8

The Wheel Masters Tire Pressure Valve Extenders #WM80294 do not need to be supported in addition to them just installing on the wheel. They will work great on your 2020 GMC Sierra as-is and would not require any additional support or bracing.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...