Will the Curt Hitch C13409 for a 2020 Subaru Forester Void the Warranty

Question

Question:

I am interested in installing the Curt Class III Round Tube Receiver Hitch - 2020 Subaru Forester Code: C13409 and want to know if this will affect my Subaru warranty? Thanks.

asked by: Mike B

0

Expert Reply:

The Curt Trailer Hitch Receiver part # C13409 will not void the warranty on a 2020 Subaru Forester. This will be part of the protection offered under the Magnuson–Moss Warranty Act (P.L. 93-637) which protects consumers when installing aftermarket components on their vehicles.

expert reply by: Conner L

0

Answer 1

You sure can. I've attached the picture of the Curt #C13409 on your 2021 Subaru Forester. I've also attached a video of the complete install. So now you know what it looks like and how to get it on there.

view full answer...

Answer 2

When installing the Curt hitch part #C13409 on your 2020 Subaru Forester you'll need a 5/8 inch drill for the install of the heat shield. You'll need to use a grinder to enlarge a couple holes in the frame as well. I attached an…

view full answer...

Answer 3

The hitch that you want for your 2021 Subaru Forester is the Curt Trailer Hitch Receiver #C13409. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common…

view full answer...

Answer 4

When installing the Curt Hitch Receiver #C13409 to your 2020 Forester that hole is enlarged so the grommet will not fit back in the hole. This does allow some dirt or debris inside the frame rail, which is standard on most vehicles. It is not a…

view full answer...

Answer 5

You do indeed have the option of reinstalling the heat shield with either the etrailer Trailer Hitch #e83ZR or Curt Trailer Hitch #C13409. You would need to drill holes in the heat shield and then re-install it, but this is totally optional so if…

view full answer...

Answer 6

The speed limit for the 4.80-8 Trailer Tire and Wheel, part #AM30020, is 65 MPH.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Will the Curt Hitch C13409 for a 2020 Subaru Forester Void the Warranty

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching