Installation of Curt Hitch Receiver Leaving Frame Port/Hole Open on 2020 Subaru Forester
Question:
This hole in the frame rail originally had a plug to keep out water and debris. In the installation video, after installing the hitch, these holes were left unplugged. Doesnt this create an easy entry for water and therefore rust? Do you have a solution?
asked by: Brian
Expert Reply:
When installing the Curt Hitch Receiver # C13409 to your 2020 Forester that hole is enlarged so the grommet will not fit back in the hole. This does allow some dirt or debris inside the frame rail, which is standard on most vehicles. It is not a problem as water will not stay in that frame rail. You will want to paint the hole you enlarged to make sure there is that seal on the bare metal as corrosion could start if you skipped that sealing step.
You can add a cover to that rail if you find something large enough and then seal it with Loctite RTV 598 High-Performance Silicone Gasket Maker - Black - 2.7-Fl Oz Tube # LT37467. You will still want to paint the bare metal first however.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Video: etrailer Class III Trailer Hitch Installation - 2024 Subaru Forester
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: Does the Heat Shield Need to be Removed to Install the etrailer Trailer Hitch Receiver
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: etrailer Trailer Hitch Receiver Installation - 2022 Subaru Forester
- Q&A: SHould the Heat Shield be Reinstalled When Installing the Curt C13409 on my 2020 Subaru Forester
- Video: Curt Trailer Hitch Installation - 2020 Subaru Forester
- Shop: Suspension Enhancement
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2022 Subaru Forester
- Search Results: draw~tite
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Hitch Installation Tips
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Q&A: Curt Trailer Hitch for 2021 Subaru Forester
- Video: Curt Class III Trailer Hitch Installation - 2022 Subaru Forester
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2021 Subaru Forester
- Video: Curt Trailer Hitch Installation - 2022 Subaru Forester
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: Drill Size for Installing Curt Trailer Hitch C13409
- Q&A: Will the Curt Hitch C13409 for a 2020 Subaru Forester Void the Warranty
- Q&A: Comparing Available Hitch Options For A 2020 Subaru Forester
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Search Results: hm11143865