Identifying Correct Replacement Handle for Dutton-Lainson Trailer Tongue Jack
Question:
My trailer is a 1996 with an 800 lb rated Dutton-Lainson jack. I cannot find any ID on it. It has a u-shaped cap over the gears the handle turns that is held on by a spring clip. Will DL22448 work as a replacement handle??
asked by: Randy
Expert Reply:
Dutton-Lainson identifies replacement parts for its products based on the model number and/or manufacturing date code. These identifiers are stamped into the product.
Check at the bottom of the main tube, about an inch or so above the swivel caster. There should be a 4-digit date code stamped into the tube (it should be stamped in the vertical direction).
My contact at Dutton-Lainson confirmed that their products of that era (1996) did not have a model number stamped but will have the date code. (The date code is written as week number and then year, so for example a date code of 4195 would indicate manufacture in week 41 of 1995.) They indicated that if your jack date code is 4296 or later the correct handle should be part # DL22446; this is the replacement handle for a side-wind jack. If your jack is a side-wind type, then this is your part.
If your jack is a top-wind type, then please provide the date code so we can get you to the correct replacement handle.
Products Referenced in This Question
Replacement Handle for Dutton-Lainson Sidewind Style Trailer Jack - 600 - 1,000 lbs (1996 and Newer)
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Sidewind
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Replacement Handle for Dutton-Lainson Sidewind Style Trailer Jacks - 1,250 - 2,000 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Sidewind
- Dutton-Lainson
more information >
Continue Researching
- Shop: Replacement Miter Gear Kit for Dutton-Lainson Trailer Jacks - 600 - 1,000 lbs. (1997 and Newer)
- Search Results: dutton lainson jack
- Search Results: dutton lainson
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,100 lbs
- Video: Dutton-Lainson Trailer Jacks Replacement Miter Gear Kit Review
- Shop: Replacement Miter Gear Kit for Dutton-Lainson Trailer Jacks - 1,250 - 2,000 lbs. (1996 and Newer)
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 600 lbs
- Video: Dutton-Lainson Trailer Jack DL22674 Review
- Video: Review of Dutton-Lainson Trailer Jack - Goldenrod Swivel Topwind - DL22680
- Shop: RV Jack Pads
- Shop: Snap Pad Jack Pad for Camper Jacks w/ 5-1/2" Round Feet
- Shop: Replacement Handle for Top Wind Style Trailer Jacks by Dutton-Lainson
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Search Results: spring shackle kit single axle
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Video: Lippert Solera Slider Slide-Topper Review
- Search Results: 68149
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Search Results: 25580
- Shop: Fifth Wheel Hitch
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Tire Sizing
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
on Accessories and Parts
