Recommended Tonneau Cover for 2011 Nissan Frontier Crew Cab 5 Foot Bed and Yakima Overhaul HD

Question

Question:

Hi, im looking for options for a roll up or tri-fold tonneau cover and height adjustable bed rack system that wont impede usage of the utili-track system and bed extender. Is there a tonneau cover option that would work with the Yakima Overhaul HD? I see the retractable tonneau options listed on the Yakima website, but I dont want to go that route and lose bed space/usage of the utili-track adjacent the cab.

asked by: James C

0

Expert Reply:

I have a solution for you, but a roll up or tri-fold tonneau cover is not going to be an option with the Yakima Overhaul HD # Y01151-5868 because of the way it mounts; normally using the Overhaul means mounting it on the inside of the bed rails, which is where most tonneau covers are going to mount. The only alternative to use the Overhaul with a tonneau cover requires the # Y01155 adapter that is designed to fit into the rails that come on a few different retractable covers. Unfortunately those rails are not available on any of the fold up or roll up tonneau covers that would make this work.

I recommend using the Pace Edwards UltraGroove # 311-KRN5780 since it's canister is only 9-1/4" tall x 9-3/4" deep, so it's going to take up the least amount of space of any of the options. This is a hard tonneau cover that will provide great security for everything in the truck bed, and the integrated T-slot rails are designed to work with the Overhaul adapter # Y01155.

I've linked a review video of the Pace Edwards tonneau for you to have a look at.

expert reply by: Erik B

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 11

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.

view full answer...

Answer 12

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...