Height of Equalizer in Tandem Axle Hanger Kit APT5
Question:
What is the bolt hole center height of the Equalizer in the APT5 kit, or what is the part number of the equalizer in the APT5 kit. Im looking to replace a suspension with an Equalizer that is 7 3/4 inch long and 2 7/8 inch high. all measured to bolt hole centers. Thank you.
asked by: Jim
Expert Reply:
The center equalizer of the Tandem-Axle Trailer Hanger Kit for Double Eye Springs # APT5 is 7-3/4 inches long (center of bolt hole to center of bolt hole) and measures 3-3/16 inches tall; it is the Equalizer # TREQE1.
The equalizer that is 7-3/4 inches wide and 2-7/8 inches tall is the Equalizer # TREQE34, however this equalizer has a 3/4 inch center bolt hole while the equalizer in the # APT5 has a 9/16 inch center bolt hole. However, the most important part is the length, and since they are equal in width, the height difference between the two equalizers is so small (5/16 inch) that it won't affect your trailer's suspension height essentially at all.
There isn't a similar hanger kit with the 2-7/8 inch tall equalizer, but you won't have any problems whatsoever by using the slightly taller equalizer in the Tandem-Axle Trailer Hanger Kit for Double Eye Springs # APT5.
I have added a link below to a video review for you to check out as well of this hanger kit if you'd like.
Products Referenced in This Question
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 7-3/4 Inch Long
- Tandem Axle
- Triple Axle
- etrailer
more information >
Product Page this Question was Asked From
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 3/4" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 7-3/4 Inch Long
- Tandem Axle
- Triple Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Heavy-Duty Suspension Kit for Triple-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Q&A: Door Hinge for 2001 Exiss Horse Trailer
- Shop: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Shop: Butt Hinge w/ Removable Pin - 5" Long x 4-7/8" Wide - 1/2" Pin Diameter - Aluminum
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 3/4" Center Hole
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - AP233 Review
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Shop: Lippert Replacement Motor Harness for RV In-Wall Slide-Out - 15' Long
- Search Results: shackle
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Troubleshooting Rear Hangers Breaking and Front Shackle Strap Making Contact with Trailer Frame
- Search Results: aptt3
- Search Results: apt5
- Q&A: Will Upgrading from 4-Leaf to 5-Leaf Double-Eye Springs Increase Durability of Leaf Springs
- Q&A: How Tall is the Leaf Spring Stack for 4-Leaf Double-Eye Spring for 6,000-lb Trailer Axles e47SR
- Q&A: Does The Amount Of Leaves On A Trailer Leaf Spring Matter?
- Search Results: equal~i~zer
- Search Results: equalizer
- Q&A: Recommended Replacement Equalizer For Trailer W/ 6-1/8 Long Equalizers
- Q&A: How to Find the Correct Replacement Equalizer for a 1999 Bonanza 3-Horse Trailer
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: leaf spring
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Shop: Suspension Enhancement
- Search Results: leaf springs
- Article: How to Accurately Measure Trailer Leaf Springs
on Trailer Suspension Parts
