Is There a Direct Connect 5th Wheel Hitch for a Curt Gooseneck Hitch

Question

Question:

BWRVK3500 will that work with the Curt flip goose neck system? if not is there a comparable product that will not just rails? Thanks

asked by: Rick F

0

Expert Reply:

I do have an option for you but there isn't a direct connect fifth wheel hitch compatible with a Curt gooseneck hitch. If you have the Curt Double Lock or Curt Ezr then you can use the Curt X5 5th Wheel Base Rails Adapter part # C16210 or part # C16220 along with a standard fifth the wheel hitch like the B&W Patriot 5th Wheel Trailer Hitch part # BWRVK3255 but that's the only option.

expert reply by: Conner L

0

Answer 1

I do have options for you but the Curt X5 5th Wheel Base Rails Adapter part #16310 for B&W Turnoverball, part #C16220 for Curt EZr, or part #C16210 for Curt Double Lock are not designed to work with auto-slide fifth-wheel hitches like your…

view full answer...

Answer 2

Yes, the Pullrite 2700 fits industry standard rails so you could go with Curt Custom, No-Drill Fifth Wheel Bracket Kit for Dodge Ram #C16419 if you just need the brackets. Or for the complete kit you can go with Curt Custom Fifth Wheel Installation…

view full answer...

Answer 3

I do have a solution for you, however the B&W Companion 5th Wheel Trailer Hitches like the Sliding #BWRVK3400-5W are not compatible with the Curt Gooseneck Hitch installed on your 2015 Chevrolet Silverado 2500. As you noted, the B&W uses a…

view full answer...

Answer 4

For your 2012 Dodge Ram with a 5-1/2 foot bed I recommend the B&W Patriot 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs #BWRVK3200 along with the B&W Semi-Custom 5th Wheel Installation Kit for Dodge Ram #BWRVR3205-00. This is a fixed 5th…

view full answer...

Answer 5

To install a fifth wheel hitch that would be compatible with your existing Curt gooseneck hitch, I'd recommend using Curt X-5 adapter, part #C16210. This adapter will lock into a Curt Double-Lock, Flip and Store gooseneck hitches (C-60 and C-600…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Your spray in bed liner would not be the issue in most cases but we do have a solution that we have found works in your situation. We had a customer come back and state that the first time he went to use the #16310 on his truck with a spray in bed…

view full answer...

Answer 8

The Curt X5 5th Wheel Base Rails Adapter #C16210 cannot be used with any automatic sliding fifth wheel hitches since those hitches attach to the pin box and rotate as the trailer turns. You'd need to use a manual slider like the Reese 20k Slider…

view full answer...

Answer 9

Based on my research, your model 2700 PullRite SuperGlide Fifth Wheel Trailer Hitch is compatible with industry standard, above bed base rails. This means that the hitch will in fact work perfectly with the Curt Custom Fifth Wheel Installation Kit…

view full answer...

Answer 10

The two are completely different. EZ roller is the brand name of Husky's 5th wheel hitch slider. An auto slide hitch refers to the Demco Hijacker Auto Slide such as #DM8550034. The Auto slide hitch isn't compatible with the Curt #C16220 X5…

view full answer...

Answer 11

Most industry standard trailer hitches like the Curt A20 5th Wheel #C16541 will fit the Curt X5 5th-Wheel Base Rail Adapter Plate #C16220. The A20 will fit so no need to be concerned with the components you have. A hitch that wouldn't work with…

view full answer...

Answer 12

The Curt X5 #C16220 Base Rail Adapter Plate provides a set of industry standard fifth wheel hitch mounting rails which are compatible with your Husky 5th wheel hitch. The only industry standard compatible hitch it won't work with is an auto slide…

view full answer...