Gooseneck Hitch Cover for 2016 Nissan Titan XD Factory Gooseneck Package

Question

Question:

Have a 2016 Nissam Titan XD with factory Gooseneck hitch and chain brackets. All 3 covers are missing. Do you have covers that replace the factory holes? I dont see anything in previous QandA with this model

asked by: RUSSELL W

1

Helpful Expert Reply:

I have a solution for the gooseneck hitch cover, but the two outer holes would only be available through Nissan. You can use the Curt # C66165 for the gooseneck hitch cover on your 2016 Nissan Titan XD, which will give your gooseneck hitch protection from the elements and is made from a durable rubber.

expert reply by: Erik B

1

Answer 1

I contacted Curt to confirm fit and they instead recommended Replacement Rubber Cover for Curt Underbed Gooseneck Trailer Hitch #C66165 because the model #C66145 is for Ram OEM trucks. Attached is a review video for additional information.

view full answer...

Answer 2

The Replacement Rubber Cover for Curt Underbed Gooseneck Trailer Hitches #C66165 is 2-5/8" in diameter and will fit in gooseneck holes that take standard 2-5/16" diameter shanks.

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 12

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Gooseneck Hitch Cover for 2016 Nissan Titan XD Factory Gooseneck Package

Product Page this Question was Asked From

Continue Researching