Buyers Products Hitch Plate Fit on 2020 Ford F-600

Question

Question:

Hi, will this fit a 2020 Ford F600?

asked by: Michael L

0

Expert Reply:

Buyers Products Hitch plate part # 3371809060A works for your 2020 Ford F-600 as long as your frame measures 34 inches wide on the inside of your frame rails. This hitch isn't a confirmed fit for your application so measuring your frame rails is going to be the best way to determine if the frame is different from the F-550.

expert reply by: Clayton O

0

Answer 1

Based on the information I could find on your 2011 Freightliner M2 cab and chassis it appears you have a 34" wide frame. The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper #3371809050 is specifically designed to fit a 34" wide…

view full answer...

Answer 2

Yes, the Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with Pintle Mount #3371809050 that you referenced does fit the flatbed/dump bed you have on your 2000 C6500. According to Buyers Products this fits your chassis but will require some…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

I have a solution for you but the Buyers Products Hitch Plate for Pintle Mounting item #3371809030B only fits 1999 and newer Ford F-350's. For your 1986 F-350 Cab and Chassis you will want the Buyers Products Flatbed/Flatbed Dump Hitch Plate…

view full answer...

Answer 8

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 9

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 10

Hello Curtis. You can absolutely use an RV mount tow bar with your 2006 Ford E350 Van. For example, the Blue Ox Avail Non-Binding Tow Bar #BX7420 is compatible with any 2" hitch receiver. This could be on a motorhome, van or pickup truck. As…

view full answer...

Answer 11

I do have an option for you but the Curt Trailer Hitch Receiver part #C15800 is designed for passenger vehicles like the Ram 3500, Chevrolet Silverado 3500, and GMC Sierra 3500 so it will not fit your 2009 Volvo D13. However, what you can use is the…

view full answer...

Answer 12

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Buyers Products Hitch Plate Fit on 2020 Ford F-600

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching