Thule Fairing that Can Fit Subaru Factory Crossbars

Question

Question:

Would this fit the profile of a Subaru OEM Aero bars on my 2020 Legacy or similar?

asked by: James M

0

Expert Reply:

Yes the AirScreen XT for Thule Crossbars # TH72WV would fit the OEM crossbars of a 2020 Subaru Legacy due to the universal design of the attachment hardware.

expert reply by: Jameson C

0

Answer 1

It isn't necessary to use the Replacement Clear Film #853-5481 if you don't want to; there haven't been any complaints I'm aware of regarding paint issues. And the tape should come off easily with no damage to your paint, yes.

view full answer...

Answer 2

The most hidden trailer hitch we offer for your 2019 Subaru Impreza is the EcoHitch part #306-X7350. This hitch has a hidden crosstube which means the only thing you'll see hanging below the rear bumper is the hitch opening. This also helps quite…

view full answer...

Answer 3

I'm sorry to hear about your locks! Unfortunately, if you tried to unlock the lock cores on your Rapid Gutter Feet #TH65BJ on your 2018 Jeep Wrangler, the only way to remove the knobs is to carefully drill out the cylinders. I recommend reaching…

view full answer...

Answer 4

I went ahead and brought the issue to my contact at Thule, and he said to either use WD-40 to spray on the available threading and use a pair of pliers to grab onto the T-Bolt while you try to rotate the knob. This will allow you to have extra…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Thule Fairing that Can Fit Subaru Factory Crossbars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching