Replacement Spring Bar U-Bolts for Reese Weight Distribution System

Question

Question:

I need 2 ea 5/16 U Bolts. Inside width 1 1/2 in. Shank 1 1/8 min, OR 1 1/4 max length. Thread length does not matter. It is for a old reese stabilizer bar cam arm. Thank you in advance. BTW Reese co. sent me the drawing spects. but have no part.

asked by: Donald N

0

Expert Reply:

Sounds like you are looking for the Replacement U-Bolts for Reese or Pro-Series Weight Distribution Spring Bar Lift Chains # RP58032 which fits the ends of the spring bars from Reese.

expert reply by: Jameson C

0

Answer 1

The u-bolts included with #RP58032 are 3/8 inches in diameter. The threaded part has 16 threads per inch. This kit is specific to Reese and Pro-Series chain hanging weight distribution systems so if that is what you have then this is the correct kit.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 9

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Replacement Spring Bar U-Bolts for Reese Weight Distribution System

Product Page this Question was Asked From

Continue Researching