Recommended Trailer Wiring Harness For 2020 Ford Edge Titanium

Question

Question:

is there a wiring harness for 2020 Ford Edge titanium? already have a hitch just have a small trailer without brakes

asked by: Tony

0

Expert Reply:

There is a trailer wiring harness for the 2020 Ford Edge Titanium with Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C73FR which will plug in behind the tail lights and give you a 4-pole flat on the Edge to power the trailer lights.

expert reply by: Heather A

0

Answer 1

Yes, we have the Curt T-Connector trailer wiring harness part #C73FR which is a confirmed fit for your 2019 Ford Edge Titanium and the best option for your Edge. It has the easiest install and the most reliable option we have for your vehicle. I…

view full answer...

Answer 2

Trailer coupler height varies slightly on every trailer and every vehicle has a slightly different trailer hitch receiver height based on the hitch manufacturer. Most trailers have a coupler height between 15 and 19 inches, but there are exceptions…

view full answer...

Answer 3

We do have trailer hitch wiring harness for your 2024 Ford Edge, with the right one depending on the model of your Edge: - SE & SL: T-Connector Vehicle Wiring Harness #C89FR - Titanium: T-Connector Vehicle Wiring Harness #C73FR

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

You are correct, the Curt T-Connector Vehicle Wiring Harness #C56272 is not a fit for a 2019 Ford Edge; this harness is only a fit for 2015-2018 Ford Edge SE and SEL models; whoever told you it did fit your vehicle was mistaken. We carry the correct…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Recommended Trailer Wiring Harness For 2020 Ford Edge Titanium

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching