Mounting Compatibility of Kuat Switch Ski and Snowboard Carrier with Rhino-Rack Pioneer Platform

Question

Question:

Can this be mounted to a Rhino Rack pioneer system? If so, What is needed? Thank you

asked by: Matt

0

Expert Reply:

The Pioneer platforms can absolutely use the Kuat Switch 6 Ski and Snowboard Carrier - 6 Pairs of Skis or 4 Boards # KU44FR. You will simply need the Rhino-Rack Accessory Bars for Pioneer Platform Rack - 48" Long - Aero Bars - Qty 2 # RR43137B to give you the crossbars to connect to. Adding these crossbars allows you to use most roof mounted accessories.

expert reply by: Jason S

0

Answer 1

We can get your 2016 Honda Pilot with a naked roof set up to carry your skis, and you'll need to start with a roof rack. The best option for your Pilot is going to be a rack system from Rhino-Rack because they offer a rack system that is the same…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 5

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt…

view full answer...

Answer 9

Both the Rhino-Rack Vortex Aero and Thule WingBar roof rack systems have very nice features and would work well for your 2014 Hyundai Santa Fe. Both systems are designed to work on vehicles that have the flush mounted rail system. As far as the…

view full answer...

Answer 10

The Stealth Hitches Hidden Rack Receiver - Custom Fit - 2" #SH59VR is a fit for your 2020 BMW X3 whether it is the M40i model or not. This receiver is only for bike rack or accessory use. If you want to tow with the hitch receiver, you instead…

view full answer...