No Left Turn Signal And Hot Yellow Wire On Curt Trailer Wiring For A 2019 Jeep Wrangler Unlimited
Question:
I installed a 56407 harness to my 2019 Jeep warngler jl unlimited hot wire connect to battery Ground to frame right turn Signal works running lights work left yellow wire is hot all the time no turn signal at harness plug Help please
asked by: Robert H
Expert Reply:
Installing the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Item # C56407 on a 2019 Jeep JL Wrangler Unlimited should be straight forward. Due to the plug and play connectors, typically there are very few things that could go wrong. To narrow down the issue you are having, I would start by removing your left tail light. Check the pins on each of the plugs to make sure none are bent. If any are carefully straighten them. Reconnect the plugs and make sure it is fully connected. It sometimes can be a little hard to push them together and hear the click. Once connected push the red tab down to hold the two connectors together.
Check the ground wire to make sure it is not moving. If you can spin the ground wire ring terminal under the screw then the ground is bad, check the screw, if it cannot be tightened down it will need to be moved to another location where the metal is clean and thick enough so the ring terminal does not move under the screw. Reconnect the tail light to the harness plug. Repeat steps with the plugs to make sure they are fully connected.
Test the four pole plug with a 12v circuit tester. Make sure when testing at the four pole plug that no one is applying the brakes when you are checking the turn signal. The yellow and green wire act as the brake signal and the turn signal. If the brakes are applied, the yellow wire will be hot all the time. If all are working correctly, connect to a trailer and test the light functions on the trailer from the vehicle. If you find there is an issue with the light functions then you know it is the trailer side and not the harness.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Video: Polar Side-Door Bar Lock Assembly Review and Installation
- Search Results: 20575r14
- Shop: Demco Spare Tire Mount for up to 4" Tall Trailer Tongue - Black
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2020 Jeep Wrangler
- Shop: Cam-Action Lockable Door Latch w/ 36" Pipe for Enclosed Trailers - Zinc Plated Steel
- Shop: Cam-Action Lockable Door Latch Kit w/ Wide Hasp for Small Enclosed Trailers - Zinc-Plated Steel
- Search Results: drop foot
- Search Results: spring bar
- Shop: Replacement Drop Leg for Bulldog Round Trailer Jack or Powered Drive Camper Jack
- Shop: Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate - Zinc
- Shop: Mighty Cord Replacement RV Power Inlet - Twist Lock - 50 Amp - Black
- Video: Choosing the Right Trailer Wiring
- Shop: Brake Controller
- Video: Redarc Tow-Pro Liberty Brake Controller Installation - 2020 Subaru Outback Wagon
- Search Results: redarc
- Search Results: red arc liberty
- Q&A: How to Wire Trailer Connector on Jeep Wrangler for European 7-way
- Q&A: 2020 Subaru Outback 7-Way Trailer Wiring Harness for Reverse Light
- Q&A: Trailer Left Side Tail Light Stays Lit Up Bright All the Time
- Q&A: How to Find Stoplight Switch Circuit in 2020 Subaru Outback for Install of Brake Controller
- Shop: Vehicle Tow Bar Wiring
- Video: Curt Tow Bar Wiring C56196 Review
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2021 Jeep Wrangler Unlimited
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Fifth Wheel Hitch
on Custom Fit Vehicle Wiring
