What is Difference Between Curt Fifth Wheel Rails C16104 and C16204

Question

Question:

what is the difference between 16104 and 16204 I will be towing a 11,000 lb 39 fifthwheel Thank you

asked by: Dorman C

0

Expert Reply:

The difference between the two Curt rail kits is the finish only. The # C16104 has a gloss finish and the # C16204 has a matte finish. So it really comes down to which look you'd prefer.

expert reply by: Jameson C

0

Answer 1

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 2

In order to install the Curt A16 5th Wheel Trailer Hitch part #C16120 you'll need to position the base rails 22" apart on center. That is the distance between the center of the legs front to back. I have attached a photo with the dimensions…

view full answer...

Answer 3

The Reese Fifth Wheel hitch part #RP30047 is designed to fit the industry standard style of fifth wheel rails that are very common and are spaced 22 inches apart. I attached a picture that shows the dimensions of the rails this hitch is designed to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

On oil bath hubs the seals are different than standard grease seals. The correct replacement for what you have is #91030. Unitized oil seals like this have a part that stays fixed and a part that rotates with the hub for optimum leak protection. I…

view full answer...

Answer 12

Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but because you…

view full answer...

What is Difference Between Curt Fifth Wheel Rails C16104 and C16204

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching