I Need a Trailer Wheel with a 5 on 5.5" Bolt Pattern What is Available

Question

Question:

I need 5x5.5 trailer wheels.

asked by: Marc

0

Expert Reply:

We offer the Steel Solid Center Trailer Wheel part # AM20053. this has the 5 on 5.5" bolt pattern your are looking for. It is a 10" rim that is 6" wide. Check out the linked video on it.

This is the only wheel that we have with that lug/bolt pattern as it is fairly uncommon.

expert reply by: Randy B

0

Answer 1

For just a replacement tire, we do have the Kenda Loadstar K364 Trailer Tire #AM10040. This 6.90/6.00-9 size tire will be the exact same size as what you currently have mounted, however we do not currently carry the 9 inch wheels that these will…

view full answer...

Answer 2

The 5 on 5 and 5 on 5-1/2 bolt patterns are not common any longer. We do have a few options though and I have included links to the right for you. If you wanted to switch to a more common bolt pattern you would have to replace the hubs. And for…

view full answer...

Answer 3

I zoomed in on your picture and your current tire size is 20.5 x 8-10 which is an older size the is most like the current size 205/65-10. You purchased Kenda tires, part #AM3H390, which are 205/65-10 size tires. The problem it's on the wrong…

view full answer...

Answer 4

Unfortunately we don't have a hub that is compatible with your requirements. In order to assist, you would need to change your spindles and have them professionally welded. If you are willing to do this, you can use the BTR EZ Lube Spindle…

view full answer...

Answer 5

The replacement idler hub kit that you referenced, Dexter 2200-lb E-Z Lube Hub Assembly #8-258-50UC1-EZ that is shown in the linked video, does use the same inner and outer bearing (L44649) and it does have the 5-on-4-1/2-inch bolt pattern you…

view full answer...

Answer 6

I can help you with determining the correct replacement wheel and tires for your trailer with a 6.90-9 tire. Normally you would just need to measure the diameter of the wheel to get the size, but we know a 6.90-9 tire fits a 9" x…

view full answer...

Answer 7

Your 6.9 - 9 sized tire is the same as a 6.90/6.00-9 like the Kenda Loadstar #AM10040 you mentioned. This tire has a maximum capacity of 1,298 pounds when inflated to 60 psi.

view full answer...

Answer 8

You could use a tubeless tire in place of a tube tire. However when you use a tube with a tubeless tire it will cause the tires to generate excessive heat. And heat is the number one enemy of tires. Based on this it is not recommended. It is…

view full answer...

Answer 9

To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located…

view full answer...

Answer 10

The Steel Solid Center Trailer Wheel part #AM20053 is what you are after. It is 10" in diameter and 6" wide. It also has the 5 on 5.5" stud pattern you are looking for with the 4" center hole. Check out the linked…

view full answer...

Answer 11

To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located…

view full answer...

Answer 12

The Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-3/4" Tall Front/Center/Rear #APT5 does not have different size shackle straps. They are all 2-5/8 inches from center of hole to center of hole. If your current straps are…

view full answer...