Will the Gen-Y Anti-Rattle Clamp Work With Trailer Hitch On Toyota Land Cruiser

Question

Question:

Will the Gen-Y anti rattle clamp work with the rounded hitch receiver of a 2009 Toyota Land Cruiser? Have a fast way ALBM that has a little rattle at the connection I’m trying to fix. Rounded receiver.

asked by: Jason M

0

Expert Reply:

The Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers part # GY88XR works with any 2" trailer hitch receiver so you will not have an issue.

expert reply by: Conner L

0

Answer 1

The Gen-Y anti-rattle device you mentioned part #GY88XR does have a reputation as fitting really tightly. Some people report that using a hammer works for them, but I personally wouldn't want to mess with all of that. A U-bolt style…

view full answer...

Answer 2

It is not extremely uncommon for the hitch pin hole on a trailer hitch receiver to become oblong after frequent usage. This is usually attributed to frequent back and forth movement of the shank inside the receiver tube opening that in time will…

view full answer...

Answer 3

We have just what you're looking for with the Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers #GY88XR. The sleeve acts as a wedge to take out play between your hitch receiver and extender. Although it does not not require a wrench and…

view full answer...

Answer 4

We do have parts available for the 2024 Toyota Tundra 4WD models so we can definitely set you up. For an air bag kit I recommend the Air Lift #AL84JQ. These are the 5,000 lb capacity air bags. They will help level your ride and improve overall…

view full answer...

Answer 5

That is a keen observation and a good question. I actually had the chance to assist with assembly of one of the Flint Hill Goods 30" x 50" Wheelchair Carriers #FHG99ZR not too long ago. The main bolt for the shank is indeed quite…

view full answer...

Answer 6

Yes, the Replacement 2" and 2-5/16" Dual-Sided Ball part #C45923 will work with the Curt Pintle Hook with 2-5/16" Ball part #C45908.

view full answer...

Answer 7

The Blue Ox Adjustable Ball Mount with Pintle Hook for 2-1/2" Hitch #BLU25XR and the Curt #C45908 are identical. According to Blue Ox and Curt they don't make the parts for each other so in theory it is not the exact same part, just…

view full answer...

Answer 8

It sounds like you are looking for an adjustable ball mount that has both a hitch ball and pintle hook combo. If that is the case then we have the perfect option for you in the Curt Pintle Hook part #C45908 which comes with a pintle hook/ball combo…

view full answer...

Answer 9

With the large collar on the end of your receiver for your Subaru Ascent it does not appear you will be able to use the Blue Ox Hitch Receiver Immobilizer II #BX88224. Instead you can use the Gen-Y Iron Grip Anti-Rattle Hitch Pin #GY39FR with the…

view full answer...

Answer 10

Hitch accessories tend to wobble, especially those that use a 1-1/4 inch to 2 inch adapter. The threaded hitch pin can only do so much to combat the movement. The issue is that the shank of the accessory has to be slightly smaller than the opening…

view full answer...

Answer 11

An anti-rattle hitch pin will work for both hitch mounted accessories like bike racks and cargo carriers in addition to a ball mount with a hollow shank. However, most ball mounts have a solid shank and most anti rattle hitch pins used for bike…

view full answer...

Answer 12

That is correct; the Draw-Tite QSP Trailer Hitch Silencer #63080 is only designed to fit on Draw-Tite brand aftermarket hitches. Instead, I recommend using the Gen-Y Anti-Rattle Clamp #GY88XR for your 2" hitch receiver to help eliminate…

view full answer...

Will the Gen-Y Anti-Rattle Clamp Work With Trailer Hitch On Toyota Land Cruiser

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching