Electric Winch For Kar Kaddy SS Tow Dolly

Question

Question:

Do you have an electric winch that works with the kar Kaddy ss?

asked by: Thai

0

Expert Reply:

The manual winch for the Kar Kaddy is a 15' nylon webbing strap with 1400 pounds capacity. A comparable electric model is the Dutton-Lainson # DL25200 Electric Winch with 1500 pound capacity featuring a sturdy 20' by 2” strap, and it includes wiring harness for connection to your tow vehicle. Installation will require some drilling for mounting to the Kar Kaddy frame, and bolts, nuts, washers and lock washers to attach.

I have included a link to this product and a review video.

expert reply by: Les D

0

Answer 1

Yes, the replacement winch part #DMKK2W does fit your Demco Kar Kaddy SS460 and would be the correct replacement for it.

view full answer...

Answer 2

The MaxxAir FanMate Rain Cover in Black #MA00-955002, smoke #MA00-955003, or white #MA00-955001 are confirmed to fit the rounded factory mounting points like you see on the attached photo. If you have the flat mounting anchor points like in the…

view full answer...

Answer 3

This is a common question about this (and other) vent covers. None of the covers are tall enough for a vent lid to open 100%. However, most, including the Fan-Tastic #FVU1500WH, will open most of the way and allow 100% of air flow produced by the…

view full answer...

Answer 4

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover,…

view full answer...

Answer 5

There could be two possible reasons as to why the clutch is not engaging when you are pulling in your boat with the Dutton-Lainson TW4000 StrongArm Electric Winch part #DL25200. The first reason is the simplest to fix and it entails tightening the…

view full answer...

Answer 6

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 9

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 10

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Electric Winch For Kar Kaddy SS Tow Dolly

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching