Roof Rack for 2016 Mercedes Sprinter 2500 High Roof To Carry Thule Hullavator

Question

Question:

Hi there - I have a high roof Sprinter 2500 4x4 with factory roof rails. I would like to get a roof rack that I can use with a Thule Hullavator. I have a Fiamma awning installed on the passenger side. Can you suggest a rack to buy? Thanks!

asked by: Laura A

1

Helpful Expert Reply:

Thule has their ProBar Evo roof rack part numbers # TH713700, # TH460R, and # THKIT3101 as a confirmed fit for your 2016 Mercedes Benz Sprinter 2500 with the high roof and factory tracks which is also compatible with the Thule Hullavator # TH898 as well.

expert reply by: Jameson C

1

Answer 1

For a square crossbar set the longest we have is the 60" Thule SquareBar Evo #TH712500. The longest crossbar available is the 80" Yakima CoreBar Crossbar #8880656 which comes as a single crossbar, but we also have the 79"…

view full answer...

Answer 2

Yes the Thule ProBar Evo roof rack part numbers #TH713700, #TH460R, and #THKIT3101 is a confirmed fit for your 2016 Mercedes Benz Sprinter 2500 and the best option for your vehicle. This rack is made to the highest quality standards, is aero shaped…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 8

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 11

For your 2018 Honda HR-V to be compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs #TH898, you have to use slightly longer crossbars. The Hullavator requires 4-8 inches overhang to give clearance. In order to give…

view full answer...

Answer 12

There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars #INXB100-108, Flush Feet for Aero Crossbars #INXS200, and Custom Fit Kit #INK482. This rack has a 100 lbs…

view full answer...