Will Thule Snug Tite Hitch Lock and Anti-Rattle Device Work on Thule Hitching Post Pro 934Pro  

Definitely! The Thule Hitching Post Pro #TH934XTR uses a lot of the basic Thule equipment including the following: Stay-Put Cradle - #853-7887 Anti-Sway Attachment - #852-2903-001 2" Hitch Adapter - #853-7489 Round Tube End Cap - #853-2181…

Thank you for the picture. It looks like you have the Thule Hitching Post Pro, part #TH934XTR. We have a replacement bolt for that, but the bolt you reference, part #915087031, is not it. The replacement bolt you need comes in the Replacement…

To replace the factory threaded hitch bolt that comes with the Thule Parkway use the Replacement Hardware #7520990001. This kit will include the hitch bolt and a wrench for installation. If you are looking for added security, Thule offers the Snug…

Actually are Thule Hitching Pro part #TH934XTR is the same as the 934PRO that you also mentioned. This is the current new version of the rack but we decided to keep the old part number.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

It sounds like you need to re-calibrate the zero point on your Lippert Ground Control 3.0 #LC304136 system. Below I've listed out the steps you'll need to follow and will allow you to use the auto leveling again. Zero Point Calibration The…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

The Global Link RV Entry Door Locking Latch Kit #295-000019 that you referenced would be the correct fit for your 2010 Keystone Montana as this is a fit for standard RV doors like what your Montana has. I attached a review video link for this latch…

Sorry to hear about the troubles you're having! To remove the Alpha Systems 4034 Roof Coating for RV Roofs #AL34CV from the side of your 1998 Tiago, you can use: - A type of chemical paint remover, - A Paint scraper tool, - A Pressure washer, Or…