Heavy-Duty 2 Inch Trailer Hitch Receiver Fit on 2004 Ford F-350 Cab and Chassis With 34 Inch Frame

Question

Question:

I need a hitch for a 2004 f350 and its a 34 inch frame. Preferably 16,000+lbs with a 2 inch receiver?

asked by: Aaron D

0

Expert Reply:

There is one trailer hitch receiver available for your 2004 Ford F-350 cab and chassis with a 34 inch frame that has exactly what you are looking for - a 2 inch receiver and towing capacity of at least 16,000 lbs.

The hitch you need is the Curt Trailer Hitch Receiver # C15445.

This hitch is a fit for your '04 F-350 cab and chassis with a 34 inch frame and has a 17,000 lbs towing capacity and 2,550 lbs tongue weight capacity.

expert reply by: Kyle S

0

Answer 1

The CURT Trailer Hitch Receiver #C15445 that you referenced should work well for your 2000 Ford F-350 with a single rear wheel axle as this hitch is confirmed to fit all models of the 2000 Ford F350 cab and chassis. As long as the fuel tank is in the…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver part #C15400 and the Curt Trailer Hitch Receiver part #C15800 are the exact same trailer hitch save for one has a 2" receiver tube opening and the other a 2-1/2" receiver tube opening. The dimensional drawing…

view full answer...

Answer 3

I spoke with my contact at Curt about trailer hitch #C15445. He said that from the rear most attachment points on the vehicle to the top of the cross tube is 5-1/2 inches. If this is not a great enough distance to accommodate the step bumper and ramp…

view full answer...

Answer 4

In regards to the Curt Trailer Hitch Receiver part #C15445, the distance between the top two mounting holes front to back is 17.695".

view full answer...

Answer 5

The distance from the mounting location to the top of the receiver tube for the Curt #C15325 is 4-1/4 inches. This Class V hitch is confirmed as a fit for your 1995 GMC C/K Series Pick up. It has a 2 inch receiver opening, is rated for a maximum…

view full answer...

Answer 6

There are a number of options for Class V trailer hitch receivers that are weld-on options and fit a frame width of 33-1/2 inches, it just depends on what is best for your application in terms of drop (there isn't anything custom fit for your…

view full answer...

Answer 7

I am happy to help! The width of the Curt Trailer Hitch Receiver #C15325 measured center of the left side bolt hole to the same center of the same hole on the right side measures 34-1/2". From the center of the furthest forward bolt hole to the…

view full answer...

Answer 8

The Curt hitch part #C15400 that you referenced does fit your 2019 Ram 3500 Cab and Chassis.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Thanks for reaching out, Adam! The Buyers Products Hitch Plate with 2" Receiver Tube #3371809060A is designed to fit a Ford chassis, and all of the other HD hitches like this from Buyers Products. For your application you need a universal hitch…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Heavy-Duty 2 Inch Trailer Hitch Receiver Fit on 2004 Ford F-350 Cab and Chassis With 34 Inch Frame

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching