Does Curt Hitch # C15400 Fit 2019 Ram 3500 Cab and Chassis

Question

Question:

Will this fit my new truck or do I need another hitch?

asked by: Warren

0

Expert Reply:

The Curt hitch part # C15400 that you referenced does fit your 2019 Ram 3500 Cab and Chassis.

expert reply by: Jameson C

0

Answer 1

There are a number of options for Class V trailer hitch receivers that are weld-on options and fit a frame width of 33-1/2 inches, it just depends on what is best for your application in terms of drop (there isn't anything custom fit for your…

view full answer...

Answer 2

The distance from the mounting location to the top of the receiver tube for the Curt #C15325 is 4-1/4 inches. This Class V hitch is confirmed as a fit for your 1995 GMC C/K Series Pick up. It has a 2 inch receiver opening, is rated for a maximum…

view full answer...

Answer 3

I am happy to help! The width of the Curt Trailer Hitch Receiver #C15325 measured center of the left side bolt hole to the same center of the same hole on the right side measures 34-1/2". From the center of the furthest forward bolt hole to the…

view full answer...

Answer 4

There is one trailer hitch receiver available for your 2004 Ford F-350 cab and chassis with a 34 inch frame that has exactly what you are looking for - a 2 inch receiver and towing capacity of at least 16,000 lbs. The hitch you need is the Curt…

view full answer...

Answer 5

I spoke with my contact at Curt about trailer hitch #C15445. He said that from the rear most attachment points on the vehicle to the top of the cross tube is 5-1/2 inches. If this is not a great enough distance to accommodate the step bumper and ramp…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

Good morning, Rich. I do have one resource which you should find helpful. I am sorry to say that at this time we do not have any pictures of videos of the Curt #C62ZV hitch being installed on a Cadillac Lyriq. Reason being we have not had this…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does Curt Hitch # C15400 Fit 2019 Ram 3500 Cab and Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching