Recommended Class V Trailer Hitch for my 2014 Ram 3500

Question

Question:

Do you have a trailer hitch to fit a 2014 Ram 3500 with a 6.4 hemi engine and 4 wheel drive?

asked by: Martin B

0

Expert Reply:

We have a great solution but the Curt Trailer Hitch Receiver part # C15845 is not a confirmed fit for your 2014 Ram 3500.

Instead the Curt Trailer Hitch Receiver part # C15803 is the one to go with. It share the exact same specifications as the one you looked at but is custom designed for your truck with or without a factory hitch.

expert reply by: Randy B

0

Answer 1

I would be happy to! It sounds like your 2018 Ram 3500 is the cab and chassis model. To add a hitch to it you will want the Curt Trailer Hitch Receiver item #C15800 for a 2-1/2" receiver or item #C15400 for a 2" receiver. Both of…

view full answer...

Answer 2

What you describe isn't normal. Trailer axles are manufactured with a bow or crown in them, a slight arc with the high side on the top of the axle. When the trailer is loaded, the axle will straighten out so the tires make even contact with…

view full answer...

Answer 3

The B&W Companion Flatbed #BWRVK3050 referenced in your question is designed to work with the B&W Flatbed Turnoverball #BWGNRK1500. In order to use the Companion the gooseneck hitch must first be installed. I spoke with my contact at B&W…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Recommended Class V Trailer Hitch for my 2014 Ram 3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching