Replacement Thule Traverse Foot and Fit Kit for Roof Rack

Question

Question:

Does this assembly include everything other than the lock? From the picture I can not tell if the pad and arm that latches to the door are present.

asked by: Jarret

0

Expert Reply:

The Replacement Foot for Thule Rapid Traverse Foot - Qty. 1 # 7522249001 does not come with the lock or the fit kit (custom door jamb clip). Some vehicles no longer have that fit kit available for the Traverse feet, so you may need to upgrade to the newer Evo Clamp Feet for Thule Crossbars - Naked Roofs - Qty 4 # TH710501 along with the fit kit compatible with your specific vehicle. Without your vehicle information I can't give you the part number you would need or specify if an upgrade is the only option.

If you put your vehicle into our fit guide it will guide you to the roof rack compatible. Your current bars will work with the new feet if you need to upgrade. You can reuse your current lock if you still have it or you can upgrade all the locks to the newer more secure style without the number printed on the cylinder face # TH450400.

expert reply by: Jason S

0

click to enlarge

Answer 1

To avoid your bed when towing a 5th wheel on your 2017 Ford F-450, the best way to carry your couple of kayaks is to use a roof rack and a front hitch receiver with a load extender. You may not be able to use your sunroof with the kayaks installed.…

view full answer...

Answer 2

The Thule Roof Rack Fit Kit part #TH29TX (145271) is designed for use with the new Evo Clamp Feet for Thule Crossbars part #TH710501 which are only compatible with the new crossbars that have an integrated channel underneath like the Thule SquareBar…

view full answer...

Answer 3

The Thule Podium 460 you referenced for old square bars has been discontinued so that is why the expert answers suggest using the Evo Fixpoint Feet #TH49SC for use with the new Thule SquareBar that have a slot in the bottom like the aero style bars.…

view full answer...

Answer 4

The Thule #TH480R foot pack isn't compatible with the square crossbars unless they're the newer style that have the slots in the underside. Unfortunately, Thule no longer offers feet that are compatible with the older-style square bars nor is…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 11

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 12

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Replacement Thule Traverse Foot and Fit Kit for Roof Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching