To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.
Features:
Thule WingBar Evo Crossbars 53" - Silver - Aluminum - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everyone. Today in our 2019 Chevrolet Colorado, we're going to take a look at and show you how to install this Thule ring bar Evo roof rack system. Now it's consisting of a couple of different parts. We're going to have our 53 inch wing bar up top, and you see how it has a nice aerodynamic shape to it. That's going to help cut down on wind noise and drag. It is also available in silver.
Just look at etrailer.com for whatever color you wish to have. Now it's really cool what Thule did with these new wing bars is that when we flip open this cap, we have a rubber stripping up here, which is also going to help cut down on wind noise and drag. But unlike the load bar where you have to pull the stripping out, and have to cut it to length, whatever T track accessory you want to use, you just slide your accessory between these two strips to wherever you desire it to be on your roof rack. And then from there, there's no cutting necessary on your rubber strip. You just shut the cap and you're good to go.Now down here we're going to have our Evo clamp feet.
There's going to be four total that comes in your kit. These are what connects your crossbar to your roof. We'll pop off the end cap real quick, and we'll see kind of what's on the inside. We have the insert for our fit kit hook, we have the tightening bolts on the inside right there, which is going to help secure it to the roof. And then we'll put the end cap back on.
We see we do have these pop locks right here. You can replace those with Thule lock cores if you wish. That's going to just help you have a more secure roof rack, so no one can remove it without the keys. And then down below we're going to have our fit kit, which is designed specifically for our Colorado. Which includes this hook right here, and this thick rubber pad that's under our clamp feet.
You can see right there. The rubber coating on both of those are going to help protect your truck from any type of scratches or abrasions.Now what's different about how this attaches to your roof, instead of just going under the door, we're going to see that it comes all the way down and under our weatherstripping. So keep in mind, you will have to pull this down to get your hook in place. But it's still going to be able to do its job. It's not going to interfere with the weather stripping at all. Now let's go ahead and provide you guys with a few measurements. First, we're going to measure from the top of our roof to the bottom of our wing bar. That's going to be three and a quarter inches. So that's going to be more than enough space for any of your clamp on accessories to come around the crossbar without interfering with your roof. Or even if you have a sun roof, you'll still be able to operate that as well. And now from the top of our roof to the top of our crossbar, that's going to be four and three quarters inches. Now that's relevant because that's how much you're going to be adding onto the top of your roof.So any low clearance situations you just want to be wary that you have that added length on top. We're going to have 220 pounds of load capacity up top, which is more than your standard 165. But you want to double check with their Colorado's owner's manual and make sure that your roof can handle that weight. Now that we've gone over some of those features, let's show you how to get it installed. Now we've got everything we need right here in front of us. I'll show you how to finish assembling it. It's going to be a pretty easy process. First we'll take our crossbar. Go ahead and flip it over. You can see I have one of the legs assembled right here. I'll show you how to finish doing that on the other side. So first things first, we need take off this end cap, there's just a little button right here we're going to push down on to pull it out. We'll set that to the side. Now I want to grab our Evo feet. I'm going to take our fit kit pad.We're going to clamp it down on top right here on that little plate. You just want to push down until you can feel it clamp over and it's going to be tight. Just cover every perimeter area of it. And now from here, I'm going to push down on these two silver buttons right here. Now it's going to unlock this lock right here, which will allow us to slide it into the channel. You want to make sure that it's facing outside. We'll go ahead and slide that on. We're going to come up to the edge of this scale. We've already had it marked to the setting we need, and you can find this in your fit kit instructions. So we're just going to bump that up against it, just like that, and then leave it. Once you let go of those buttons, it's going to lock into place. Now we're going to grab our custom fit hook. And what's nice about these Evo feet is you just got to push down until it clicks, and then it's locked in. Now from here, we're just going to go ahead and get it up on our roof.Now I'm just go ahead and set it on our roof. You do you want to be careful not to damage your roof by letting it fall on top. So we're just going to stretch that over. Get that clamp over and set the pad down. Go on both sides and do this. And before we tighten down it all, we need to make sure we get our crossbar spread measurement. And you can find this in your instructions. We're going to measure from the front of our back crossbar, to the front of the front crossbar. Once you get it on one side, make sure you go to the other one and get the same measurement. Now from here, for our clamps to get properly in place, we're going to have to pull down on this weatherstripping just to get it out of the way. And the clamps actually are going to sit right under there. We'll just pull it down, get it in place like that.And then once you tighten it down, you can actually push this back up. Now, one thing you do want to make sure you do is you take your little bumper stop right here, and before you put the hook down, you need to set it on this second layer right here. You can tear the adhesive off and put it on your Colorado right under the clamp. But for demonstration purposes, we're going to skip this step. Now that we have everything in place, we'll go ahead and start tightening down. We can just take our included tightening tool, and there's a little bolt on the inside of that slot, and go ahead and insert it in there. And then we're just going to tighten it down until the hook is snug on our roof. But from there we're going to go to the other side and do the same thing. And this is going to help prevent the roof rack from pulling too much on itself on one side.Now once you've got both sides pretty snug, like I said, rotate from each side, making a couple of turns each. And when you hear that click, and I'll do it again for you, that's going to let you know that your roof rack is tightened down to the torque specified by Thule. So you can go ahead and stop tightening down. Just kind of snug your weatherstripping back up in there. It's not too vital, but just however you like it. And then just grab your end caps and throw those on. And then you're ready to hit the road. And that'll do it for our look at a Thule ring bar Evo roof rack system on our 2019 Chevrolet Colorado.
Average Customer Rating: 4.8 out of 5 stars (579 Customer Reviews)
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.I've had the roof rack for a year now and we only use it sporadically in the winter to put the ski box ontop of the car but it works great. Very easy to install and remove and very sturdy. Previously I had the kind that bolted into the roof of my SUV and had a terrible experience with that (we lost the rack and kayaks on the freeway and it tore holes in my roof). The clamp style is the only kind we'll get from now on because they are much sturdier and no risk of losing them. Definitely recommend them.
Whisper quiet, no discernible effect on MPG, easy to use with our Thule box and racks, and looks absolutely great. Great purchase and way worth it!
I just got my packages and had it installed within the hour very satisfied
No problems installing. The rack is doing fine.
Easy to install, fit and finish are top notch.
Excellent! Worked perfectly with the feet from my other vehicle!
Worked perfectly on my 2020 GMC Sierra. Looks and works great.
I've owned this roof rack for a year now, and it has served my purposes (carrying my kayak around on my truck) quite well. It was fairly easy to assemble, largely because the entire instruction guide was in pictures.
I have had to retighten the rack a couple of times since putting it on the roof, so I tie the kayak down to the front and back of the truck as well as to the roof rack. I suspect the ocean kayak puts a bit of lift on the roof rack resulting in the loosening.
Watched a video and worked through it, went on great and looks awesome on vehicle
Great quality products! Easy installation with properly guided instructions. One of the best tracking information, from ordering to delivery. Would strongly recommend etrailer to anyone looking for roof or hitch bike racks.
I’ve had my Thule roof rack for a year. It’s sturdy and easily handles two kayaks. Love it!
Product was right fit for my vehicle and installed perfectly. Etrailer was knowledgeable and got the goods to me quickly. Enjoyed working with them and will again.
Excellent system
I bought the Thule Evo Roof Rack to transport my kayak on my Lexus 300H. Thule will advise you on their website that his particular rack is not right for a Lexus 300H (i.e., they don't make a roof rack for a Lexus 300H); it is really for a Camry, but etrailer told me that is worked, I trusted them and they were correct. After all, a Lexus sedan is really a fancy Camry, but Thule will not acknowledge this point. It works great. Thule makes a solid product.
Sturdy and working as expected.
Seamless ordering and delivery. Video instructions very helpful
Holds everything we need and it looks g reat!
All good: shipping, install, product.
This was the part I needed to add Thule kayak lift to my roof rack. System costs a fortune, but all is well made and works great.
Works real well!
Worked Perfect & Secured a very heavy load in extreme weather & off road conditions
I have almost always had roof rails on my vehicles. My F150 had no rails and I was nervous about clamp style rack holders given what I tend to carry on top. These have been great and I am positive I have overloaded them numerous times.
Customer Service at etrailer is par none, both before the sale and after. I had an unpleasant experience elsewhere buying and installing a roof rack for my old Prius. After a few days of frustrations, I sent it back to that old online store.
This time, I contacted etrailer to see what ALL I needed to install a rack on my new 2018 Honda CRV. They sent me the part numbers and a link to purchase. Viola! After they arrived, I had difficulty with one of the parts (at 69 yo my hands are not too strong or flexible) and contacted etrailer. They sent pictures and more thorough instructions on installing the rubber strip. Another VIOLA!
I'm so very happy with my total experience at etrailer. Customer Service, truly, is not better any where else I have made online or brick-n-mortar purchases.
Good quality and easy to set up on my 2016 jeep Cherokee! Happy with the new cross bar setup!
This things will leave a nasty stain on your vehicle roof once is removed or adujsted. But once it latches, it will not move. works as intended
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.