Can Brophy Pintle Hook # BR27FR Fit 3 inch Lunette Ring

Question

Question:

Hi, will this pintle hook BR27FR, work with a 3inch ID lunette ring with a 1-5/8 diameter cross section? Thanks.

asked by: Dusty

0

Expert Reply:

Yes the Brophy Pintle Hook # BR27FR does fit a 3 inch diameter lunette ring like you mentioned as that's a standard size.

expert reply by: Jameson C

0

Answer 1

The Brophy Pintle Hook part #BR27FR will accept any lunette ring with an inner diameter equal to or greater than 2-1/2" which will have a thickness of 1-1/2". This is the correct way to determine compatibility between a pintle hook and…

view full answer...

Answer 2

The standard size for Lunette rings is 3 inch like what you have. While I am not totally certain what hook you have it's likely you did buy the correct size. Due to the looser connections of Pintle/Lunette setups some noise is to be expected.…

view full answer...

Answer 3

The pin of the Brophy Pintle Hook #BR27FR can not lock the hook in the open position. Is there a reason you'd want ability to do this?

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

I checked with B&W and their Trailer Hitch Receiver Lock for 3" Hitches item #BW23FR doesn't have a maximum capacity listed because it is rated for a shear strength much higher than the capacity of any 3" receiver and ball mount on…

view full answer...

Answer 7

The wiring color codes and wire gauge recommendations for the Pollak Heavy-Duty, 7-Pole, Round Pin, Trailer Wiring Connector, item #PK11700, are listed below. White - Ground Return - 8 gauge Black - Clearance, Side Marker, Identification - 12 gauge…

view full answer...

Answer 8

The Replacement Inner Slide Channel for Dexter Model 6 #T4846500183 has a shank that measures 3" wide x 2-1/2" tall to it's a little smaller than the 3" square shank that comes on the Replacement Inner Slide for Demco DA91…

view full answer...

Answer 9

The Brophy Pintle Hook for 2-1/2" Hitches part #BR27FR measures 9" from the center of the pin hole to the center of the U-shape pintle hook. It measures 12" from the center of the hitch pin hole to outer most portion of the pintle…

view full answer...

Answer 10

You can expect the installation of the #C59236 in the 2023 Palisade video to be almost identical to your 2022 Hyundai Tucson. I'm not sure if the tail light style varies so removal may be a little different but the rest will be the same.

view full answer...

Answer 11

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or 3" diameter sizes. For example, the Curt Pintle Hook for 2" Hitches #C48004 fits lunette ring couplers with a minimum…

view full answer...

Can Brophy Pintle Hook # BR27FR Fit 3 inch Lunette Ring

Product Page this Question was Asked From

Continue Researching