Replacement Inner Coupler for Ranch Hitch Fifth Wheel to Gooseneck Adapter

Question

Question:

Will this item work with the ranch hitch fifth wheel to gooseneck adapter? Was curious if it could be used with the outer tube of the ranch hitch? Thank you.

asked by: Justin M

0

Expert Reply:

We have a replacement inner coupler or the Ranch Hitch with part # AM3101 but the # BD1289020300 would not fit in place of this.

expert reply by: Jameson C

0

Answer 1

To remove the threaded collar on the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100 or #AM3139 the manufacturer recommends the use of the Slide Hammer for Ranch Hitch #AM3103 as you can see by the cut out of the instructions.…

view full answer...

Answer 2

Installation of the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100 can be simplified by using the Slide Hammer #AM3103. Although not required for installation, the slide hammer makes the process quicker and easier because it…

view full answer...

Answer 3

Yes, the Base #AM3102 for the Ranch Hitch #AM3100 does thread onto the kingpin of your 5th wheel pin box. A Spanner Wrench #AM3104 is used to thread the base on and off the Collar System #AM3110. You may need to spray some break free onto the threads…

view full answer...

Answer 4

I went to our warehouse and checked the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter, part #AM3100. The couplers still have the 2 square head bolts used for adjusting the height of the coupler. They arrive at our warehouse with the…

view full answer...

Answer 5

The Replacement Offset Coupler #AM3140 is only going to be compatible with the Adapter Base #AM3102. This base will accept either the Offset Coupler #AM3140 or the Straight Coupler #AM3101. The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter…

view full answer...

Answer 6

To replace your current Mor Ryde LRE system and go with an EZ-Flex system is possible, but you will need to replace the center hangers as well as the equalizers to do this. To pick out the correct equalizer will require you to measure the distance…

view full answer...

Answer 7

The Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP94716-61301 referenced in your question is indeed confirmed to replace your existing Lippert 1116 pin box. As you mentioned, this adapter has a gross towing capacity of 16,000…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 11

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement Inner Coupler for Ranch Hitch Fifth Wheel to Gooseneck Adapter

Products Referenced in This Question

Continue Researching