Will Inno Roof Cargo Box IN94FR Fit Factory Bars of 2019 Toyota 4Runner

Question

Question:

Hi, I just want to ask of this will fit my 2019 toyota 4runner sr5 stock roof rack system, specially the clearance of the front and back touching the roof of the vehicle.

asked by: Rey B

0

Expert Reply:

The Inno roof cargo box part # IN94FR does fit the factory crossbars of your 2019 Toyota 4Runner and to determine if this will allow your rear hatch to open you'd just need to measure from the center of the rear crossbar back to the hatch seam. If that distance is at least 12 inches the rear hatch will open easily.

I attached a review video for this box for you to check out as well.

expert reply by: Jameson C

0

Answer 1

We do indeed have the mounting hardware you're needing. The part number is #TH04997. Thule confirms that it's a fit for their Summit cargo box. I've provided you with a diagram showing how the install hardware is used.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Sorry for the confusion, our part number #IN87RR is the same as Inno's BRP820 which does fit the Inno Wedge cargo box you referenced.

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Both the Rhino-Rack Vortex Aero and Thule WingBar roof rack systems have very nice features and would work well for your 2014 Hyundai Santa Fe. Both systems are designed to work on vehicles that have the flush mounted rail system. As far as the…

view full answer...

Answer 11

Yes, the Inno Ridge Rooftop Cargo Box - 8 cu ft - Gloss Black, part #INBRA220R-BK, will fit your 2022 Toyota 4Runner. This box will fit with no issues because of the u-bolts. I have included a video review link below.

view full answer...

Answer 12

We do indeed have what you need to set up your 2022 Hyundai Santa Cruz for towing a trailer. I do need to mention that the correct wiring harness to start with will depend on if your Santa Cruz came equipped with the factory to package or not, but I…

view full answer...

Will Inno Roof Cargo Box IN94FR Fit Factory Bars of 2019 Toyota 4Runner

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching