What Size Drill Bit is Used to Enlarge Hole to Install Hitch on 2017 Subaru Outback Wagon

Question

Question:

What size step bit is recommended

asked by: EC

0

Expert Reply:

The tool list for the etrailer hitch part # e98847 includes a 17/32 inch drill bit, a rotary tool/carbide bit, and tin snips related to the hole enlargement and fascia trimming required.

expert reply by: Jameson C

0

Answer 1

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 2

The etrailer.com Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #E98847 requires using a 17/32 inch drill bit to install and then we recommend using a rotary tool with a carbide bit to enlarge the hole for the…

view full answer...

Answer 3

I recommend the etrailer.com hitch part #e98847 for the 2019 Subaru Outback Wagon which provides an inch more ground clearance than the other hitch options for the Outback Wagon. The extra clearance is helpful when carrying a bike rack when driving…

view full answer...

Answer 4

Yes, a class III hitch comes with a 2" receiver and a class II hitch comes with a 1-1/4" receiver. The larger 2" receiver allows for a much greater variety of hitch mounted accessories to choose from. Therefore, although…

view full answer...

Answer 5

Both of these Thule racks will do an excellent job of safely and economically hauling four bikes (assuming you aren't using a Class I hitch, which has a manufacturer recommended limit of hauling two bikes at a time). The Camber #TH9056 is lighter…

view full answer...

Answer 6

Thanks for reaching out! I recommend installing the etrailer Trailer Hitch Receiver #e79KR on your 2019 Lincoln MKC for use with the Yakima EXO Swing Away 2-Bike Rack #Y92VR. It has a matte black finish that not only looks more rugged but actually…

view full answer...

Answer 7

The Curt #C13410 and Draw-tite #76227 are very similar in design and both have the same weight ratings of 600lbs tongue weight and 4,000lbs of trailer weight. I do like that Draw-Tite does add the additional plate of steel in between the hangers that…

view full answer...

Answer 8

As far as the Draw-Tite - 2" #75673 and the etrailer Hitch - 2" #e98847, these two hitches are almost identical in every way when installed on your 2018 Subaru Outback. They both provide you with 600 pounds of maximum tongue weight capacity…

view full answer...

Answer 9

The foam panel is in the bumper to help support the bumper panel as well as provide a cushion for the cover if there is a minor collision. Without the cushion the cover will tend to break or crack easier as it does not have the support needed. I have…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

What Size Drill Bit is Used to Enlarge Hole to Install Hitch on 2017 Subaru Outback Wagon

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching