Tow Lights Wiring Harness fits a 2019 Prius LIMITED

Question

Question:

Is there a towing harness for the 2019 Prius limited? I only see Prius, prime, c and v as listed options. Nothing for limited.

asked by: Tom

0

Expert Reply:

I contacted the Curt Manufacturing today and found out that the Curt # C56353 model will fit the 2019 Toyota Prius Limited.

I have attached a link to that product page, and video links for a review and installation demonstration.

expert reply by: Les D

0

Answer 1

For your 2018 Toyota Prius I recommend the Draw-Tite Sportframe Trailer Hitch Receiver #24966. This class I receiver has a maximum tongue weight of 200lbs with a maximum trailer weight of 2,000lbs. Be sure to verify your maximum weight capacities…

view full answer...

Answer 2

For your 2022 Toyota Prius, I recommend the Curt Hitch - 1-1/4" #C11473. Not only will this hitch provide you with 2,000 pounds of gross towing weight, it also comes with a high-quality gloss outer coat over the base powder coat which gives…

view full answer...

Answer 3

The Curt T-Connector #C56353 for your 2019 Toyota Prius has the stop lights on the red wire which shares connectors with the brown (running/trail light) wire. If you jump to the 5:45 mark in the attached install video and/or jump to step 11 in the…

view full answer...

Answer 4

I would be happy to help! I looked up the specs of your Sylvan Sport Go Trailer and it has a hitch height of 17". When we had a chance to install the Curt Trailer Hitch Receiver #C11473 you were looking at on a 2017 Toyota Prius like yours we…

view full answer...

Answer 5

For the 2022 Prius AWD, you'll want to use the Curt #C69KR. The installation is pretty straightforward, the harness plugs inline between the vehicle's taillight wiring harnesses and taillight assemblies. One wire will need to be ran to the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Tow Lights Wiring Harness fits a 2019 Prius LIMITED

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching