Replacement Hinge/Strut for Thule Evolution Cargo Box

Question

Question:

I have an older Thule Evolutuion roof box. I am not sure of the model number. The interior dimensions are 31 wide by 73 inches long. One of the hinges has worn out and wont stay attached to the mount. I need a new hinge... can you help? I have attached pictures of the hinge and dimensions open and closed. thanks in advance for your help,

asked by: Daniel A

0

Expert Reply:

We have a replacement hinge/strut part # TH14936 that will fit your Thule Evolution roof cargo box.

expert reply by: Jameson C

0

Answer 1

Sounds like you are looking for a replacement hinge for your Thule Evolution cargo box. The correct hinge would be the part #TH14936.

view full answer...

Answer 2

It sounds like you're looking for the #TH14936, which is the Replacement Lid Lifter Hinge for Thule Evolution, Atlantis, Hyper XL, Sonic XL, and Ascent Series Cargo Boxes, as well as some older discontinued boxes that are listed on the…

view full answer...

Answer 3

The original hinges or struts are no longer available for the Thule Adventurer cargo boxes but the current ones, #TH14936, will fit and are what you should be using. There isn't a right and left and the orientation should not matter. It…

view full answer...

Answer 4

The difference between the Thule hinges or struts #TH14936 and #TH14933 is the spring tension. Both of these hinges will work for your Sears X Cargo Sport 20 lid. However, the #TH14936 includes better springs.

view full answer...

Answer 5

We do offer the Thule #TH14936 replacement hinge. Typically if one hitch fails, the other will before too long, so it wouldn't be a bad idea to replace both or at least keep an extra on hand as a spare.

view full answer...

Answer 6

You are correct there is a weight advantage for aluminum, item #C18100, over steel, item #CC-100, but the biggest reason aluminum is considered over steel, for most of our customers, is corrosion resistance and appearance. You do not need to upkeep…

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 9

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

Hey Adam, I went ahead and checked with Thule, and you were right on with the replacement lid lifter for your Thule Spirit 1600XT cargo box: - Replacement Lid Lifter Hinge for Thule Cargo Boxes #TH14936 So the #TH14936 is exactly what you need, and…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Hinge/Strut for Thule Evolution Cargo Box

Product Page this Question was Asked From

Continue Researching