Electric Stabilizer Recommendation for Stabilizer Set with Damaged Side

Question

Question:

Can you buy just one stabilizer, the left to replace. Or do you have to buy the complete unit with both stabilizers on it.

asked by: Frank P

0

Expert Reply:

The individual sides of the stabilizer kit you have on your trailer are not available so now would be the time to replace the entire kit with something better like the Ultra Fab part # UF39-941705 which would be a great choice as it fits a wider frame range, has dual motors, and is very reliable.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The feet on the Power Twin stabilizer #UF39-941705 are each 8 x 5-3/4 inches.

view full answer...

Answer 2

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

view full answer...

Answer 3

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

view full answer...

Answer 4

The Ark stabilizers won't affect your ground clearance, but to determine the right ones that really depends on how high up your frame is off the ground. Overall, the Ark RV Stabilizer Jacks #ARK34FR are 16.6" collapsed and 23.6"…

view full answer...

Answer 5

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 6

Both of the ARK stabilizer jacks #ARK94FR and #ARK87FR can rotate 90 degrees forward and back so in a way it is 180 degrees like you asked about. The difference is the #ARK94FR has a square tube and #ARK87FR has a round tube. These are both going be…

view full answer...

Answer 7

Typically stabilizer jacks and leveling jacks are the same thing. The Ultra Fab part #UF39-941705 can do both as well. It can lift up to 30 inches from where the jacks are mounted on the trailer. When the jacks are at their max height they have a…

view full answer...

Answer 8

The measurement you will need is from the outside of the frame. The Ultra-Fab Power Twin II Stabilizers #UF39-941707 can be adjusted between 48-77 inches wide. The mounting brackets will sit under the frame with the outside of the angled metal…

view full answer...

Answer 9

To change the battery mode on the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR you'll need to insert the included CLAW tool into the small opening next to the battery type indicator light. Press and hold that button (using the…

view full answer...

Answer 10

The Blue Ox Patriot #BLU37TR includes a separate monitor that plugs into a 12v outlet in your motorhome to display when the brakes are being applied and alert you in the event of a breakaway between the motorhome and towed vehicle. The monitor will…

view full answer...

Answer 11

Ultra-Fab Stabilizer Jack #UF39-941707 will bolt onto a trailer using the bolt holes that are present on the mounting flanges of this jack as well as with the included nuts and bolts. You will most likely have to drill holes in the frame of your…

view full answer...

Answer 12

The mounting bracket for the Ultra-Fab Power Twin II Manual Stabilizer #UF39-941704 is approximately 35-3/8" in length. The frame height would dictate the amount of lift you would want but there are other factors to take into account. The…

view full answer...

Electric Stabilizer Recommendation for Stabilizer Set with Damaged Side

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching