Remote Compatible with MaxxFan Plus 00-04900kx

Question

Question:

I purchased the MA99FR MaxxFan Plus 12 V 10 speed . Which remote works on this fan? Thank you,

asked by: Lisa

0

Expert Reply:

The Replacement Roof Vent for MaxxFan Plus Roof Vent w/ 12V Fan - Powered Lift - 10 Speed - Smoke # MA99FR you referenced will use the Replacement Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent # MA59FR. This is a wired remote that mounts to the wall. There isn't a wireless remote control unit for that specific vent fan.

expert reply by: Jason S

0

Answer 1

I won't be able to reference the numbers printed on the circuit board but all you need to do to determine the correct replacement circuit board for a MaxxAir MaxxFan Plus Roof Vent is look for the model number under the screen. If it is a 4751KS,…

view full answer...

Answer 2

Yes we do sell a replacement lid for the MaxxFan Plus RV roof vent part #MA99FR with the part #MA10A40009K.

view full answer...

Answer 3

The 4 tabs on the side of your MaxxAir #MA99FR are designed to allow you to mount a rain shield like the MaxxAir FanMate RV and Trailer Roof Vent Cover - 25" x 18-1/8" x 10-1/4" - White #MA00-955001. A rain shield like the #MA00-955001…

view full answer...

Answer 4

If you have 12 volts going to the fan it is motor. You will need the Replacement 12-Volt Variable Speed Fan Motor for MaxxAir MaxxFan RV Roof Vents item #MA10-20968. If the voltage isn't going to the motor than it could be the controller which is…

view full answer...

Answer 5

Can you tell me exactly which model MaxxFan Plus you have? The #MA10A21275K replacement circuit board is the proper replacement for the following fan units: MaxxFan Plus: 00-04500K ( #MA00-04500K), 00-04700K, 00-04800K, and 00-04900K ( #MA99FR). If…

view full answer...

Answer 6

I determined that your Ventline exhaust fan v2525 is a northern breeze model and unfortunately we do not carry a replacement motor. I recommend Replacement Roof Vent for MaxxFan Plus Roof Vent w/ 12V Fan - Powered Lift - 10 Speed - Smoke Item…

view full answer...

Answer 7

Yes, the MaxxAir MaxxFan Plus Roof Vent #MA00-04751KSX that you referenced would easily replace the MaxxFan you currently have installed in your 2015 Montana 36RL as this fits the same size RV roof opening.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Remote Compatible with MaxxFan Plus 00-04900kx

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching