Weight of MaxxAir MaxxFan Mini Roof Vent

Question

Question:

How heavy is this vent? Thanks!

asked by: Tina

0

Expert Reply:

The MaxxAir MaxxFan Mini Roof Vent with 12V Fan # MA00-04401M weighs just 10 lbs.

I have added a link below to a video review for you to check out as well.

expert reply by: Kyle S

0

Answer 1

Hey Cliff, with the Replacement Controlled Motion Hinge #LC95VR to get the desired effect where the door doesn't swing open or closed all you have to do is replace is a single hinge and not all three.

view full answer...

Answer 2

The MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan - Manual Lift - 4 Speed #MA00-04301M that you referenced would not let any light in since the lid is totally solid so for a semi-opaque lid you'd want the smoked version part #MA00-04401M.

view full answer...

Answer 3

The difference between the MaxxAir MaxxFan Mini Roof Vent #MA00-04401M and the MaxxFan Roof Vent #MA00A04401K does indeed simply have to do with its profile. The MaxxAir Mini Roof Vent will only extend 2-7/8 inches above the roof when it's closed…

view full answer...

Answer 4

The max amperage draw of the MaxxAir MaxxFan Mini RV roof vent part #MA00-04401M that you referenced is 5 amps.

view full answer...

Answer 5

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 6

The MaxxAir MaxxFan "Mini" Roof Vent w/ 12V Fan, #MA00-04401M and the MaxxFan Roof Vent w/ 12V Fan, #MA00A04401K are very similar but there is a difference in the profile. The MaxxAir Mini, #MA00-04401M will set at 2-7/8" above the…

view full answer...

Answer 7

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 8

For your race trailer with aluminum roof panels it will seal on the edges with a Butyl Tape #AL64UV. Then you will use either a Non-Sag #AL33KV or Self-Leveling #AL68KV sealant to seal the mounting screws and edges of the aluminum roof panels to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The outer flange that sticks out to mount the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke Item #MA00-04401M is 16-1/4" x 16-1/4" so as long as you have at least 2-1/2" to 3" of space between the panel…

view full answer...

Answer 11

Yes, the B&W Continuum Weight Distribution System #BW78FR can be installed as easily on your angled driveway as it can be on level ground.

view full answer...

Weight of MaxxAir MaxxFan Mini Roof Vent

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching