Rhino Rack Flush Bar Roof Rack that Fits 2018 Honda Civic Hatchback

Question

Question:

does this roof rack system fit the honda 2018 civic hatchback, because the hatchback wasnt an option when filtering the vehicles?

asked by: Charlie

0

Expert Reply:

We have a similar Rhino Rack roof rack that does fit your 2018 Honda Civic Hatchback but the part number you referenced only fits the sedan models. Instead you'd want the part # RR78TR which is a fit.

expert reply by: Jameson C

0

Kenny C.

1/10/2021

Will this fit a 2018 Honda Civic 2 door coup?

Reply

Jon G.

1/11/2021

For your Coupe you'll need something else. The closest roof rack option to the one presented on this answer page that fits your model type is the Inno Roof Rack which includes these parts; # INXB108-2, # INXS200, and # INK683. Inno has a similar quality as Rhino-Rack and is more popular along the West Coast.

Reply

Answer 1

Thank you for that question. The Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars, part #RR92XR, has a clearance of 2 1/2" between the bottom of the bar and the roof of your 2021 Honda Civic.

view full answer...

Answer 2

The Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbar - Aluminum - Black #RR78TR is the confirmed fit for your 2019 Honda Civic Hatchback. This roof rack will have a really nice streamlined look and is rated for 165 lbs capacity. It…

view full answer...

Answer 3

The only solution to reducing wind noise on a roof rack, like your Rhino-Rack Vortex Aero Crossbars 54" #RRVA137B-2, is to install a wind fairing / deflector. To determine which size to get, measure the usable crossbar space between the…

view full answer...

Answer 4

I have the correct size for you! Since the front crossbar of the Rhino-Rack ROC25 #RR78TR measures 40-9/16" long, the 50" Fairing #RRRF4 is too long for the setup. The clamps of the 50" will interfere with the feet on the rack. With…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...