Recommended 7 way Connector for 2017 Dodge Grand Caravan Using Autowbrake

Question

Question:

Hi there, I have a 2017 Dodge Grand Caravan sxt with an existing 4 pin connection but no 12v. wire connected. We pull a camper with electric brakes so I’d like to mount the autowbrake to our trailer but I need to get a 4pin to 7 pin conversion kit and I’m also going to still need to run 12v wiring to be able to charge the trailer battery. What conversion kit and which wire would you recommend to be used specifically with the part #3430001? Thank you

asked by: BEN

1

Helpful Expert Reply:

The Autowbrake # 3430001 is a great choice! To add a 7 way to your 2017 Dodge Grand Caravan you'll want to use the # ETBC7L, since it doesn't require the wiring of a brake wire into the vehicle like the # ETBC7. You will still need to run a wire for the 12v power, but other than than it's going to be really easy to install since it plugs into your existing 4 way. To complete installation of the Autowbrake I recommend using the Junction Box and Installation Kit for Autowbrake Trailer-Mounted Electric Brake Controller # 3430001-JBK.

I've linked an installation video of the 7 way and a review video of the installation kit for you to have a look at, as well.

expert reply by: Erik B

1

Answer 1

I spoke with my contact at Autowbrake regarding the Electric Brake Controller #3430001 and he said that the included key fob has been tested to work perfectly 300 feet away. He said the fob likely works at even greater distances but this is as far as…

view full answer...

Answer 2

The Autowbrake brake controller part #3430001 that you referenced draws up to 15 amps. It's only going to draw amperage when the controller is activating the trailer brake so it would not be something you'd need to install an on/off switch on…

view full answer...

Answer 3

I attached a diagram that shows how most 7-way rounds like the #PK11720 that you referenced will get wired up. As long as you got yours wired up correctly and your trailer taillights and brakes are functioning correctly that's all that should…

view full answer...

Answer 4

Both of these are reliable brake controllers. Personally I like the freedom that the Curt Echo #C51180 gives you. You can use it on any vehicle with a properly wired 7-way and trailers with up to 2 braking axles. There is no wiring and it can be…

view full answer...

Answer 5

Curt has a recommended setup procedure outlined for the Curt Echo part #C51180 that is outlined in their install instructions for this controller but since not all trailer brakes apply the same way there isn't a standard setting you can use that…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

The white wire from the Autowbrake Electric Brake Controller #3430001 is for ground so you will just want to make sure it's securely attached to a clean bare metal surface. A weak ground can definitely prevent proper operation on the brake…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Recommended 7 way Connector for 2017 Dodge Grand Caravan Using Autowbrake

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching