Trailer Hitch for 2001 Chevy Silverado 2500 HD With Roll Pan Bumper

Question

Question:

looking for a hitch for roll pan class 4 if possible

asked by: Julien H

0

Expert Reply:

The only roll pan bumper-compatible receiver hitch we offer for a 2001 Chevy Silverado is a Class III, part # 13932. A fold down license plate holder would be a handy accessory.

I've linked to an install video for the # 13932 hitch.

expert reply by: Mike L

0

Answer 1

The B&W Companion 5th Wheel Trailer Hitch #BWRVK3500 (RVK3500) is the complete 5th wheel hitch that will mount to an existing B&W Turnoverball Gooseneck Hitch socket in the truck bed. The part #BWRVB3500 (RVB3500) that you also referenced is…

view full answer...

Answer 2

I would love to help but I can't tell you whether or not an offset hitch is required in order to be able to make full turns while towing. The reason for this is because it will vary by each truck and trailer so this is no something we have the…

view full answer...

Answer 3

While you can still use an adapter with a Leland 7910 pin box, there isn't a Reese Goose Box that is compatible so unfortunately that is not an option. What you will need for an adapter is the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck…

view full answer...

Answer 4

Yes, the Curt trailer hitch part #C14332 is a confirmed fit for your 2002 Chevy Silerado 1500 and would work well. The only versions of your truck this hitch does not fit are the ones with either a roll pan bumper or a deep drop bumper. If you have a…

view full answer...

Answer 5

There are heavy-duty Class V trailer hitch receivers that fit your 2004 GMC Sierra 2500 LD, though the hitch you mentioned is only a fit for the 2500HD model. You need to have the standard factory bumper on your truck, and if you do, then there are…

view full answer...

Answer 6

If your 2000 Chevy Silverado 2500 is an LD model then yes the Curt hitch part #C14332 is a fit.

view full answer...

Answer 7

For a truck with as big of an engine as your 2001 Chevy Silverado with a 6.0 liter engine that is going to be towing a trailer you'd want to go with a fan setup that pulls more CFM than the #FLX116 which moves 2,215 CFM. That's basically the…

view full answer...

Answer 8

The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045 that you referenced has an offset of 3 inches which would give you 3 more inches of turning clearance than what you have now.

view full answer...

Answer 9

The best option to tow a 5th wheel trailer with your 2021 Chevy Silverado 2500 is with a 5th wheel hitch that mounts directly to the gooseneck ball, which is called the Recon and is from Demco: - Demco Recon Gooseneck-to-5th Wheel Trailer Hitch…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Trailer Hitch for 2001 Chevy Silverado 2500 HD With Roll Pan Bumper

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching